Jump to content
Please check your junk folder for registration emails ×

HannesNel

General Member
  • Posts

    126
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by HannesNel

  1. 12.8V to 3.3V within 1 cm? thats not standard volt drop you dealing with. Its either a bad connection, some kind of resistances wired in (resistor etc) OR, albeit rare, a bad piece of wire - I have only seen it once so far in my life time.
  2. What did you do with your old steering wheel...I'm hunting for one in better condition then mine
  3. Open it up, check for loose connections Check for dry soldering points - reflow board (heat gun, soldering iron etc - lots of ways to do it) Check for dodgy capacitors Check screen connection Check screen power source If you comfortable with a multimeter test each component
  4. Started the rear view camera installation this past weekend. Wired the main video feed from the front to the rear. Tested the unit and all works well. Now need to find a way to still mount the camera and just reconnect everything
  5. Thanks! YIp wiring is not a problem but the actually camera: Its one of these - basically got it for free so need to somehow mount it. So either make somesort of bracket or box for it or drill through the bodywork to mount it.
  6. So my reverse camera arrived and I I want to install it this coming weekend. It came with the HSS holesaw but not sure I want to cut into the body panel. Anybody come some pics of how they mounted theirs? I am also considering hooking it up to the reverse light as its right there in the wagon door. Any other tips?
  7. Its made as both one side is the breaker head and the other side has the torque head
  8. Good tip thanks! Got my trusty breaker bar and torque wrench 2 in 1
  9. Thank you! 3 hands might make it easier yes.... Anyone know an alien?
  10. Thansk gents. Yip, I want to attempt to do it myself.
  11. What is a good km's to get cambelt changed? My legacy is almost hitting 80,000km and doesnt seem it has been done yet
  12. Gents, my exterior rubber seals and trims for doors,etc. are in bad condition. Are there generic rolls I can buy to replace all seals and trims? When I redid my ford about 3 years ago one could buy these in rolls of 10-20meters. Any idea if this is available for 06 legacy's?
  13. Washed, rewashed, polished and waxed the car this weekend. Also took off the AWD sticker on the back window as it was faded and dull. Also removed the legacy badge as I have done with all my cars
  14. yip, but budget cant stretch that high...$500 maybe $600 for now
  15. thanks guys $189.99 to pay according to the link provided by @1randomkiwi and @preim So with shipping, it basically doubles the price of the mid+mufflers @Andy_Mac Going to research for other solutions locally for a bit first
  16. oh bollocks....shipping is quite hectic and then still import taxes. Does anyone have an idea what kind of import tax I will be looking at for roughly $900 value?
  17. Or just wait for delivery from TCP auto Thanks Andy! Tony responded super quick and he has a quad tip set ! Waiting on what delivery will cost before confirming
  18. That was my original idea to cut and straight pipe it but i dont want it to be to loud....
  19. oh thanks andy! there goes my afternoon - Haven't come across this site until now If the dual cannon's are subtle and dont stick out to much I quite like them: https://www.rhdjapan.com/hks-es-premium-muffler-bph-bp5-bp9-bpe.html
  20. Thanks @sobanoodle @Andy_Mac Let me google and research a bit. Yes/no? - https://www.trademe.co.nz/motors/car-parts-accessories/performance/exhaust/listing-1896049221.htm?rsqid=ed52328ad8da4446b67a9e87aa91f133
  21. well put! Ok thanks let me take a look at some mufflers. Any brands that is more suggested then others? I still want to de-cat as well as I dont believe in cats...
  22. Thanks Sobanoodle! When you talk aftermarkets, are you talking full system from the manifold or just new piping and tips from the cat box? I don't want serious rumble,boy racer, loud screaming everytime I slightly accelerate, just when I put my foot down. I am a dad after all and need to be semi-responsible
  23. Yep done that already still can't hear it. Yip, my BP is also dead silent...but want to get it a bit more noticeable. Let me start with this snorkel...where does it sit and how does one remove it?
  24. Ok, next up is to get some rumble from my GT. Can anyone recommend anyone in the Wellington area to get the cat box removed and fit a straight pipe? Or would removing the interals of the cat be enough to get a nice rumble?
  • Who's Online   0 Members, 0 Anonymous, 66 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...