Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

BH/BE5 Cabin Air/Pollen filter How To


Flippymoi

Recommended Posts

So there is nothing in the owners manual or the service manual on the pollen filter/air conditioning filter and I could not find anything at all when searching this forum so have posted up some pics on where it is and how to replace it for the benefit of the next person like me looking for some info.

So, first thing: Yes there is a cabin air filter in most legacys. In the BH/BE 5 it sits in an air box behind the glove box and extracts contaminants from the air just before it hits the A/C heat exchanger core.

Not sure if this should go in the Tech DIY section as it is Legacy specific but feel free to move it.

Remove the glove box - Just remove all screws and stoppers. You will need to remove a plastic panel to the side of the centre console to get at the last screw (stupid design)

_MG_1009.JPG

This pic shows the air box (glove box removed). Remove the checkered plastic cover.

_MG_1013.JPG

Plastic cover removed

_MG_1010.JPG

Slide out the filter and give the inside of the box a careful vacuum to remove dead moths and the like.

_MG_1011.JPG

Insert your new filter in the correct air flow direction and replace the plastic cover. Ensure the cover is secure or it will leak air and you do not want to have to remove the glove box again. Turn on Aircon and check for leaks before replacing the glove box.

_MG_1012.JPG

This pic shows new vs old filter. I presume it has not been replaced since new which would be 10 years ago.

_MG_1007.JPG

Link to comment
Share on other sites

 subypower']

[quote name='petrolheadjman said:

I've been wondering how do to this for a while

Thanks :D

/quote]

How th bilsteins going bro? u should chuck some lowering springs in :P

Going very good man,

and i plan to quite soon actually :o Car is sitting a wee bit high. Getting new wheels next week too so car is making progress

Link to comment
Share on other sites

Easy to get from Subaru, couldn't find any online. New they are $130 genuine, I scoffed at the price so they gave me trade discount but still very pricey for what you get. Does not appear there are aftermarket ones available. If it was not so dirty I would have cleaned it with some compressed air but as you can see mine was a bit past that. You could possibly cut up some generic filter and try to fit it to the plastic frame but it would be a bit of an effort.

Link to comment
Share on other sites

 Flippymoi said:

Easy to get from Subaru, couldn't find any online. New they are $130 genuine, I scoffed at the price so they gave me trade discount but still very pricey for what you get. Does not appear there are aftermarket ones available. If it was not so dirty I would have cleaned it with some compressed air but as you can see mine was a bit past that. You could possibly cut up some generic filter and try to fit it to the plastic frame but it would be a bit of an effort.

have seen em in store at Supercheap...

Brand was FRAM...

Link to comment
Share on other sites

  • 2 weeks later...

Ryco do one that fits. It's available from any Repco / Appco store (I can do better than trade price if you want). The part number is RCA104P. It needs a little trimming to fit but it heaps cheaper than genuine Subaru.

Link to comment
Share on other sites

 robertsm said:

Ryco do one that fits. It's available from any Repco / Appco store (I can do better than trade price if you want). The part number is RCA104P. It needs a little trimming to fit but it heaps cheaper than genuine Subaru.

Do they also fit BG5's?

Link to comment
Share on other sites

  • 2 weeks later...
 chrisjunkie said:

Just a question regarding this, do they filter the air that is recycled or only air that comes from outside?

If I don't use my AC in a while, and then turn it on, I get the lovely old-smokers-car stench. :-\

Cheers

Chris

From both outside an in.

The smoke smell will be in your vent piping,

Use Glen 20 for some old smoke stench removal effect... Let rip with the whole can and the doors & windows closed and aircon on recirculate... And do it in 1/3 of can bits...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...