Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Help Please


Guest

Recommended Posts

Hi All,

I am currently trying to put a auto transmission on to a brighton but the torque converter always seems to be about 10mm too far out the transmission and I can't seem to push it in any further.

Has anyone else had this problem or do I 'force' it on with the bolts??

Cheers

Link to comment
Share on other sites

Do not force it with the bolts

wiggle the gear box to see if that works BUT i think that the splines on the torque converter is not completely meshed, there is something like 3 different sets of splines to line up, and can be a real bugger to get right, turn the torque converter by hand while pushing it in until it pops in :) it may take a few turns

Link to comment
Share on other sites

I've been trying to seat the TC in, I've turned it round a dozen times while pushing in and still could't eek out the 10mm, tried lightly tapping with a hammer and that didn't work either.

Is the input shaft meant to be fixed in the TC because it wobbles at the mo, still spins the TC but wobbles

Thanks for your help

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...