any1 know how to tune possum link

[Divine]

You could run it as a n/a till it's sorted?

[wrx_lou]

By running a filter straight of the intake manifold? Surely that would run rich as fuck.

[Koom]

 wrx_lou said:

By running a filter straight of the intake manifold? Surely that would run rich as f***.

It'll just operate in the load cells that correspond with lower than atmospheric pressure. No different to when a turbo'ed car runs in the vacuum part of the boost gauge.

TYP3RA have you tried re-loading the base tune that the Possumlinks come with? I think you can download the numbers from Link (or maybe MRTrally.com.au) and at least have a decent starting point.

[Stoffa]

Or just run your factory ecu untill you've finished the work.

[TYP3RA]

yeah bro its on that reload tune thing spoze to be a base for tuning it starts and runs but idles like a rota and mises hardout lol

[Stoffa]

Its probebly running too rich, get a wideband 02 sensor and gauge and adjust it

[codyjesen]

 Swindog said:

Yip. I might even have the original programme somewhere for the tuneable possum link. Youll a link cable and probably a serial plug adaptor

I know this might be a long shot, but do you have the program to still tune these ecus?

[Joker]

haaaaaave you tried link?

google took me here : http://www.linkecu.com/Software-and-Support/PC-Link-Downloads

[Kiwi_Fozze]

Holy 4 year thread dredge

[Joker]

its allowed

least we know the search button seems to be working like it should now & save dumb new threads popping up eh?

Edited May 8, 2016 by Joker

[Kiwi_Fozze]

Too right!!! Just had a bit of a laugh when I saw the age of it hahaha

[Joker]

hehe so did I but I do hope they check the link i googled : hope it was the right one

[codyjesen]

 Joker said:

haaaaaave you tried link?

google took me here :

http://www.linkecu.com/Software-and-Support/PC-Link-Downloads

Yea been on there

[Joker]

then did you find the right program / is that not what you needed?

get the right cable & plug into you old lappy with a serial port...

or some were hand controller?

more info better answers man

what Link version do you have?

[94 Leone]

you need v2.5 it's the one i downloaded to see how it works with my possumlink.

[Johnnynz]

 Joker said:

least we know the search button seems to be working like it should now & save dumb new threads popping up eh?

The search works HUZZAH!!!!!

[Sancho]

PCLink v2.5 is the only one that works with G1 Links (like Possumlinks)

the ECU will need WRXRoadR or WRXRoadQ (also RS instead of WRX is around)

and you will need a Serial Link.

I have been using a modern laptop with a USB-Serial Adaptor with no issues whatsoever.. (Prolific Rev D work) also this Belkin one i had laying around worked too.

I do not reccomend you attempt to tune your car yourself unless you have a Wideband and some knowledge of how Air Fuels and Ignition timing works. the Possumlink is fairly, fairly slow vs anything new.

It's boost control is a bit ****, and the knock control is also a bit ****. they also have no compensation, and no wideband supoort so you just have to watch the wideband and make adjustments that way.

[codyjesen]

 Joker said:

then did you find the right program / is that not what you needed?

get the right cable & plug into you old lappy with a serial port...

or some were hand controller?

more info better answers man

what Link version do you have?

Yup got the software, also trying to find the pinout for the ecu, i can find all the ones for the original ecus for the car, but nothing at all for the link. I have a G1 possum link

[Sancho]

the pnp link is gonna pretty much have the same wiring pinout as the standard car. I've never seen a pinout from link themselves.

[Ninja8)]

Anyone know of someone in auckland that can do a g3? Need a tidy up road retune on a gf8 i got my hands on. If not i will have to go to pbms which i dont really want to

[Guest]

 Ninja8) said:

Anyone know of someone in auckland that can do a g3? Need a tidy up road retune on a gf8 i got my hands on. If not i will have to go to pbms which i dont really want to

Glen suckling do it?

[Ninja8)]

No idea clint. You have his contact details? Pm me or txt me if u still have my digits.

[Guest]

Fb you bruv