Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Link G4+ onboard knock setup


Guest

Recommended Posts

Anyone played with the onboard knock? Would like a little guidance rather than guessing with no idea. A copy of a tune would be lovely so i can peruse knock tables.

 

Found these threads:

 

http://forums.linkecu.com/index.php?/topic/5441-knock-setup-on-g4-plug-in-evo-6/#comment-39958

 

http://forums.linkecu.com/index.php?/topic/5982-subaru-knock-settings/

 

 

  • Like 1
Link to comment
Share on other sites

You will need audible knock detection gear to set this up safely

 

Also I would recommend using a dyno, this will allow you to safely load the car up and  induce knock at low loads

 

Start at wastegate pressure only.

 

Once you have setup the knock threshold/settings correctly in PC link you will need to log ( and confirm via audible knock detection that knock is occurring) this will then give you a knock threshold number in the logging side of PC link

 

You can then quickly build your 3D table

 

The post by DavidV of the Link forums has alot of excellent info in it for you!

Link to comment
Share on other sites

Datalog the S*** out of your engine and it will give a pretty good profile of your baseline noise when the engine is known to not be knocking. The Link knock system is based on filtered signal amplitude and rpm, so if you have a baseline noise profile across the rpm range then anything spiking above that is considered knock and you can do something about it like retard timing, drop boost etc. Whether it is knock or not is another question - sometimes it is, sometimes it isnt and the ECU cant tell the difference. Just have to know your engine noise levels well enough to make a decision on what to do.

Link to comment
Share on other sites

  • 2 weeks later...
13 minutes ago, evowrx said:

Being that the link g4+ pretty much has an onboard knock box one would think you could plug headphones into the laptop for audio.

Sounds feasible, I personally haven't tried this approach. 

 

Keep us informed with your findings 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...