Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Dyno leaderboard V4


Guest

Recommended Posts

Post up the following:

 

Example:

 

Model: V6 STI

Displacement: 2l

Mods: 272 cams, GT3582, ID1000's

Fuel: E85

Tuner/dyno: PBMS

 

Full graph showing correction, torque and power.

 

Standard rules apply as per previous years. Must own the car still and be in same guise as power run.

 

Copypasta as follows:

 

Model: 

Displacement: 

Mods:

Fuel:

Tuner/dyno:

 

------------------------------------------------------------------

 
#1
Gotasuby - 393.4wkw
Model: 2002 V7 STI GDB
Displacement: 2.35l
Mods: S300 Turbo, ID1700@50psi base. ported heads, cams, fmic, 3" exhaust, DW300 FP, G4+, Twin scroll legacy headers. 
Fuel: E85
Tuner: Me/SAS
https://i.imgur.com/XMcznmY.jpg
 

Update to this car. We built a new engine for this year rally sprints. Wanted to max out turbo and header setup. Think the small legacy headers are at there limit. All at 25psi
 
 
#2

Username - 390wkw

Model: 00 V6 STI (GC8) - 390KW 30 PSI, (253 kw is at 13 psi).
Displacement: 2L 
Mods: GTX3071R twisted gen 1, Link G4+ wire in, black ops1400cc Injectors, 30 PSI, lots modified,  (1000HP capable block, Doweled, cdb, oil gallery mods, ARP headstud conversion).
Fuel: E75 ( read from dash EtOH sensor)
Tuner/Dyno: D TECH

 

#3 

shadywrx - 323.5wkw 535.8Nm e85/just under 280wkw on 98

Model: V7 STI
Displacement: 2l
Mods: Tomei Arms M8625 turbo etc etc etc

 

#4

YoungOne

Model: 99 V5 Type R - 312kw @ 22psi
Displacement: 2.35L
Mods: EJ22T, Syvecs S6 GP, 850cc Injectors, AVCS Heads, L19 studs, Mahle 2618 Pistons, Pauter Rods, 79mm Crank + more
Turbo/Boost: GT3076R gen 1 and 22 PSI

Fuel: BP 98

ECU: Syvecs S6 GP
Tuner/Dyno: Raijin Performance

 

#5

Furze - 302.08wkw

Model:  1996 Subaru WRX STi
Displacement: 2L
Mods: Custom exhaust, 4 Bar map sensor, Turbosmart 44mm wastegate, Flipped V8 STi Spec C manifold, FMIC, 1000cc Bosch injectors, Aeromotive FPR, Aeroflow Fuel rails, complete teflon braided fuel lines, stock Version 7 STi Longblock w/ Supertech Dual Springs
Turbo/Boost: Steve Murch Motorsport Holset HRC35/2
Fuel: Flex Fuel BP 98 (275kw), e85 w/ 3.5bar base pressure (302.08kw)
ECU: Link G4+ Plug in
Tuner/dyno: @gotasuby aka @SAS

 

#6

Marcas1234 - 301.19wkw

Model: 99 V5 STI (GC8) - 301.19KW ATW
Displacement: 2L 
Mods: GT3582R twisted, Link G4+, Five0 1000cc Injectors, Kelfords, Custom Everything, - (26PSi)
Fuel: BP 98
Tuner/Dyno: Glen Suckling (GDS Automotive) - (Hubs)

 

#7

Boon – 268wkw

Model: V7 STI
Displacement: 2L 
Mods: Holset WH1C twisted, Link G4, 1600cc Injectors, Process West TMIC, Llama Engineering custom all sorts of stuff
Fuel: BP 98 Octane
Tuner/dyno: Chris Wall, STM Dynapack

#8

Niran - 254wkw

Model: 2011 WRX STI Sedan
Displacement: 2500cc
Mods: Forged rebuild, Invidia TBE, DW65c, ID1000s, AEM CAI, AEM water/meth injection, Perrin FPR, Turbosmart IWG75 (17psi spring) and GFB Mach 2 
Turbo/Boost: Stock / 22psi
Fuel: Gull force 10
ECU: Stock
Tuner/dyno: Possum Bourne / rolling road
Power: 254kw and ~520nm 
 

#9

Hurrie/Niran - 244.46wkw

Model: 2011 Subaru STi Sedan
Displacement: 2.5L
Mods: 3" Catless downpipe with stock catback, DW65c fuel pump, Injector Dynamics 1000cc injectors, Perrin Fuel Pressure regulator, Grimmspeed 3port boost solenoid, AEM cold air intake and AEM Methanol injection running 50% water/meth mixture. Engine rebuilt using Mahle 4032 pistons, Eagle rods, ACL bearings/Headstud kit etc. Stock turbo & intercooler.
Fuel: 98
Tuner/dyno: Built and dyno'd by SAS, tuned by GK EuroTuning 


#10

Batbaruman - 241.4wkw

Model: WRX STI V7 - GDB
Displacement: 2.0L
Mods: Decapped STI Pink injectors, 3" TBE, 4" intake with poddy, bigger (unknown brand) top mount, Manifold spacers, oil cooler, larger throttle body, Murch TD05 in twisted turbo setup, bosch 044 pump, Tial wastegate, Tomei fuel reg, unknown BOV, Link ECU
Fuel: BP98
Tuner/dyno:  PBMS/ Rollling road (Dyno Torque is the dyno brand?)

#11

McMasterJamie - 223.3wkw

Model: Subaru Legacy 2002 STI V7 engine
Displacement: 2L
Mods: VF34 Turbo, silicone intake, 3inch from turbo back, SSI headers, Process West TMIC, 3 port mac solenoid, kinugawa wastegate actuator, dw65c fuel pump
Fuel: 98 BP
Tuner/dyno: Chris - Prestige Tuning and Motorsport / Dynapack

 

#11

94 Leone - 220.7wkw

Model:  04 V9 STi -220.7kW ATW 
Displacement: 2L
Mods: Full silicone intake w/ CAB & Blitz LM filter, 3mm thermal mani spacers, 3" RAGE exhaust, DW300 fuel pump, Link 3 port BCS.
Fuel: BP 98 
Tuner/dyno: Chris@ Prestige Tuning, Dynapack

 

#12

Niran – 220wkw

Model: V8 STI
Displacement: 2L 
Mods: Custom 3 inch exahust, Walbro feul pump, 3 port solenoid
Fuel: Gull Force 10
Tuner/dyno: Chris - Dtech (at the time)

 

#13

A_J_T - 213.6wkw

Model: 2001 BE5D Legacy B4
Mods: ST Conversion, VF34P20, 3" TB Exhaust, FMIC
Fuel: BP 98
Tuner/dyno: Dtech/Dave, Dynapack
 
#14
Johnnynz - 201.6wkw

Model: 1998 WRX
Displacement: 2l
Mods: VF22, V8 STI TMIC, TBE, Link G4
Fuel: BP 98
Tuner/dyno: Keith Stewart, Dyno pro

 

#15

Pedro - 201wkw

Model..  V4 sti Type R coupe
Displacement..2 litre
Mods..vf22 20psi, flipped and twisted, front mount, link G4,yellows
Fuel..BP98
Tuner..Keith Stewart Dynapack..

 

#16

Runrabbit - 197wkw

Model: V4 GC8
Displacement: 2l
Mods: Link G4, Process West TMIC, 3" TB Exhaust. Walbro, VF22
Fuel: BP 98
Tuner/Dyno: Mark/Dtech, Dynapack

 

#17

Kiwiflyboy - 193.3wkw

Model: SF5 Forester ST/b
Displacement: 2L
Mods: Link G4, VF30, 550cc Injectors, 3 inch from after downpipe
Fuel: 98
Tuner/dyno: NZEFI

 

#18-tied

Dairusire - 192.2wkw

Model: 1999 WRX STi Type RA Version 5
Displacement: 2.0L
Mods: VF36 Twin scroll conversion,17PSI boost, rage downpipe and ZeroSports exhaust, Link G4+ Storm, DW300 Fuel pump, Bosch Motorsports 1000cc injectors, aeromotive FPR
Fuel: 98 Ron
Tuner/dyno: Dave @ D-Tech, hub Dyno

 

#18-tied

Andy_Mac - 192.2wkw

Model: 2006 GT Spec B
Displacement: 2l
Mods: VF45, FMIC, Decatted DP, Aftermarket Catback
Fuel: BP 98
Tuner/Dyno: Dtech
 

#19

Thunda - 187wkw

Model:  92 RS EJ20G - 187kW ATW
Displacement: 2L
Mods: TD05 16g?, Yellows, FMIC, EWG, HKS Downpipe to Zerosports exhaust, Big Fuel pump, V3 Wasted spark setup, Link G4+
Fuel: BP 98 
Tuner/dyno: PBMS

 

#20

Mitch8198 - 179.5awkw @ 15psi

Model: V3 WRX
Displacement: 2L
Mods: VF30, Link G4+, V7 STi top mount, V1 RA cdb, 440's, fpr, Link bcs, Link iat, full catless exhaust & headers.
Fuel: BP 98
Tuner/dyno: Keith Stewart / Dynapack

 

#21

Timmah - 171.3wkw

Model: 2002 Wrx Wagon GGA
Displacement: 2l
Mods: TD05 Turbo, Decatted factory DP, Silicon intake, V7 STI Intercooler, DW200
Fuel: BP 98
Tuner/Dyno: SAS

 

  • Like 5
Link to comment
Share on other sites

  • Admin

Can't find the Dyno sheet atm but will find.

Youtube video is below

 

Model: 1999 WRX STi Type RA Version 5

Displacement: 2.0L

Mods: VF23,Greddy / Trust Profec B EBC @ 20lb-ish, Syms Headers, 3" exhaust

Fuel: 98 Ron

Tuner/dyno: (didn't tune, was power run) Torque Performance, rolling road.

 

Power figure came out at 183Kw on a nice hot summers day with max heat soak.

  • Like 2
Link to comment
Share on other sites

Original tune...

 

Model: GC8D 

Displacement: 2.0l

Mods: Vf30, chinese semi tuned headers, link G4, 3" exhaust, fuel pump, fpr, split fuel lines

Fuel: Mobil 98

Tuner/dyno: E&H

 

Made 201kw at the wheels. Main limiting factor was the stock top mount. Have gone front mount, and booked for a retune next thursday, gunning for that 223kw (300 hp at the wheels)

Link to comment
Share on other sites

  • Admin
37 minutes ago, Passtheacid said:

Original tune...

 

Model: GC8D 

Displacement: 2.0l

Mods: Vf30, chinese semi tuned headers, link G4, 3" exhaust, fuel pump, fpr, split fuel lines

Fuel: Mobil 98

Tuner/dyno: E&H

 

Made 201kw at the wheels. Main limiting factor was the stock top mount. Have gone front mount, and booked for a retune next thursday, gunning for that 223kw (300 hp at the wheels)

 

Should be interesting to see Your car vs mine for power output. Main differences will be that I'm running e85 with upped compression and T/S VF36 setup.

Link to comment
Share on other sites

  • Admin

Model: V7 STI

Displacement: 2L 

Mods: Holset WH1C twisted, Link G4, 1600cc Injectors, Process West TMIC, Llama Engineering custom all sorts of stuff

Fuel: BP 98 Octane

Tuner/dyno: Chris Wall, STM Dynapack

 

I suck and can't find my dyno plot. 268kw.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • Joker pinned this topic
  • Admin
21 minutes ago, gotasuby said:

Am I allowed to put my motor that is in another car? It's our rally car engine that since we have crashed have lent the engine to a mate to go to the drags with while we build our new car. 

 

If it 'made' the power in the car, then I see no reason not to considering it's still running. Gutted that the car got munted.

Link to comment
Share on other sites

4 hours ago, Dairusire said:

 

If it 'made' the power in the car, then I see no reason not to considering it's still running. Gutted that the car got munted.

 

Point of this is people get a chance to share results and get on the leaderboard. If we dont keep it fresh we would have the same 10 odd cars on it which is lame.

 

Welcome to post results this threads all about seeing whats achievable from where Im sitting not just a claim to top 10 fame.

  • Like 1
Link to comment
Share on other sites

5 hours ago, gotasuby said:

Am I allowed to put my motor that is in another car? It's our rally car engine that since we have crashed have lent the engine to a mate to go to the drags with while we build our new car. 

 

Ill let it slide its pretty grey but due to circumstances allgood.

Link to comment
Share on other sites

11 hours ago, gotasuby said:

Model: 2002 v7 Impreza sti, GDB

Displacement: 2L

Mods: s300 Turbo, ID1000 @58psi base, ported heads, cams, fmic, 3" exhaust, Deatchwerkz DW300, link g4+, twin scroll

Fuel: avgas/E18

Tuner/dyno: me/SAS

 

IMG_2126_zpsx5ebcxzi.jpg

 

Have you got a sheet with tcf and ratio? Just to be fair.

Link to comment
Share on other sites

  • 2 weeks later...

Dunno why is my torque number so different to everyone elses, is it just because rolling road vs hub dyno? Anyway, bit late but here I am

 

Model: WRX STI V7 - GDB

Displacement: 2.0L

Mods: Decapped STI Pink injectors, 3" TBE, 4" intake with poddy, bigger (unknown brand) top mount, Manifold spacers, oil cooler, larger throttle body, Murch TD05 in twisted turbo setup, bosch 044 pump, Tial wastegate, Tomei fuel reg, unknown BOV, Link ECU

Fuel: BP98

Tuner/dyno:  PBMS/ Rollling road (Dyno Torque is the dyno brand?)

 

EkGWuIu.jpg

XfpCOep.jpg

 

 

Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...