Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Boost gauge install hardware


sobanoodle

Recommended Posts

Generally they come with the boost gauge but if it didnt come with one then any hose fitting shop or your local supercheap/repco will have them on a champion stand. You can use either brass or plastic. They are known as T Fittings/T piece..well thats what i know them as anyway

 

Hose diameter depends on the fitting you have on your boost gauge but most people use 4-8mm vac hose(i like having a few different sizes spare just incase) This can be bought by the meter from supercheap/repco aswell. 

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
On 22/02/2017 at 10:42 PM, sobanoodle said:

This question should've been in "Dumb Questions" but we do not have that piece of luxury anymore.

 

Anyway, need a T-piece (joint, what's the right name?) and a bit of a vacuum line.

Where can I get a T-piece from in Auckland and what diameter hose do I need (Defi sensor)? Hoseshop

 
 

 

Was going to PM but quotings easier :)  Where did you go in the end?  I looked at supercheap yesterday they had expensive blue tube (I want black) and didn't see T pieces but I was looking in the isle with gauges not the Champion stand

 

Is this the right stuff.. bit dubious

http://www.supercheapauto.co.nz/Product/RSP-Vacuum-Washer-Hose-4mm-Per-Metre/104901

 

Edited by killervq30de
Link to comment
Share on other sites

  • 3 months later...
Still have to get some bits, planning to go to the hose shop in Avondale. They should have all the needed bits.
Not sure what size hose is needed, planning to just bring the sensor thingy with me and let them do the rest

If they dont have what you want give Repco New Lynn a try, I know that they have T pieces and various vac hose

Sent from my SM-J120ZN using Tapatalk

Link to comment
Share on other sites

11 minutes ago, tobrien109 said:


If they dont have what you want give Repco New Lynn a try, I know that they have T pieces and various vac hose

Sent from my SM-J120ZN using Tapatalk
 

 

Man that was back in march :D 

Got everything I wanted from the hose shop. 

 

Yet to install the gauge though :D 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...