Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

STI Genome boost gauge install


killervq30de

Recommended Posts

Do we have the socket to plug these controllers into a Legacy Bp5s?  If not I saw in a defi manual that you should not connect the IGN wire to ACC?  I'm hoping I can just plug and play though.  Not my actual unit either just internet pic.

20750845976_95f0bbda8d_k.jpg

 

And is this the right place to T off ? Do you cut the factory line like they have or pull it off add T short with new hose connect back up?

normal_IMG_0965.JPG

Edited by killervq30de
  • Like 1
Link to comment
Share on other sites

  • Admin

In theory you'd think so since there was a factory option for gauges up in the cubby, never found any on mine. I originally just used those crappy electrical splitters the unit came with on the clock wiring.

 

Yea thats where you want it plumbed in. just cut the original hose and trim back the sleeving to put a T in. I'd run a longer bt of hose and have the actual sensor attached to the firewall rather than right there though.

Link to comment
Share on other sites

1 hour ago, Andy_Mac said:

In theory you'd think so since there was a factory option for gauges up in the cubby, never found any on mine. I originally just used those crappy electrical splitters the unit came with on the clock wiring.

 

Yea thats where you want it plumbed in. just cut the original hose and trim back the sleeving to put a T in. I'd run a longer bt of hose and have the actual sensor attached to the firewall rather than right there though.

 

This is 2nd hand and I've seen a few for sale that are 2nd hand to and they all have Plug on the power cable for the Controller still intact so they must have plugged in rather than tap.  I'll pull off all the kick panels on both sides and have a look see.

Link to comment
Share on other sites

That socket is under the steering wheel column somewhere - specifically there for all the accessories etc, Defi I had in BH5 was connected that way (dammit wish I just kept it...) and I am hoping they still kept the same plug in BR9 as I have a harness to go in there. 

 

 

Link to comment
Share on other sites

7 hours ago, sobanoodle said:

That socket is under the steering wheel column somewhere - specifically there for all the accessories etc, Defi I had in BH5 was connected that way (dammit wish I just kept it...) and I am hoping they still kept the same plug in BR9 as I have a harness to go in there. 

 

 


What he said, I've got mine plugged into this very socket under the steering column 

And yep I'm T'd in that spot too

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...