Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

+38 offset on bh5?


iludez

Recommended Posts

So I picked up another set of wheels, didn't even occur to me to check offset. As the guy said they are off a subie.
Turns out they are +38 and I'm sure my stock wheels are +48
I would assume these would stick past the guard?

Anyone ran lower offset like this?
 
Sent from my MX4 Pro using Tapatalk
 
 


Link to comment
Share on other sites

[mention=17874]McMasterJamie[/mention] has a reasonably aggressive setup from memory. May be wider with less offset but can compare poke in willtheyfit.com
So will be a 50mm poke compared to 33.9mm.
I assume this will be a no go then with me being on coilovers too

Sent from my MX4 Pro using Tapatalk

Link to comment
Share on other sites

Mine are 8.5 inch wide with an offset of 42 and I had to roll the guards. Pretty sure 7inch with offset of 38 shouldn’t be a problem. Depends what tyres are on them as well. I’ve now got 235 tyres and it doesn’t rub at all with rolled guards but I’m not that low.
I'll be running 215/45s.
I'll test fit them today and see if they stick out

Sent from my MX4 Pro using Tapatalk

Link to comment
Share on other sites

Ohh yup. I just did it myself, bought the tool, was cheaper than paying someone to do it. It’s pretty easy to do just have to make sure you don’t crack your paint. But if you need to borrow flick me a message I’d be happy to post it if you need to borrow.
Sweet man, hopefully I get some free time today to try it and will let you know if I need it

Sent from my MX4 Pro using Tapatalk

Link to comment
Share on other sites

As the cool kids say hella flush? I don't have tyres on them currently. And I need slim wheel nuts too. So I'll hit you up if I need to roll the guards man.

These are what I got. We're chrome. Now painted.b13bc9bc33e44be5547092c8245e557e.jpga0dc0dd33c896a5b1e0351c839ab4c6e.jpg

Sent from my MX4 Pro using Tapatalk

Link to comment
Share on other sites

  • Admin

Still considerably less aggressive than McmasterJamies, but top of the tyre could have the same issues as him and need rolling.

Do third gens have rear camber adjustment?

My setup looked way too far out in the rear before drop induced camber plus an extra half a degree from camber bushes

 

38267185506_a2371111fb_b.jpg

 

Link to comment
Share on other sites

Got rid of those wheels. Decided to get my kosei wheels instead. So I've got them here and they are 7.5 wide with a 42mm offset.
Is this less aggressive then +38? They don't stick past the rear like the others did so hoping they just go on fine. Don't mind rolling the guards or raising the far up

Sent from my MX4 Pro using Tapatalk

Link to comment
Share on other sites

1 hour ago, iludez said:

So I've got them here and they are 7.5 wide with a 42mm offset.
Is this less aggressive then +38?

 

If the width remains the same then yes, less track width. Higher the offset, narrower the track width.

Link to comment
Share on other sites

  • 3 months later...

Bumping this. So I'm looking at at set of 19x8s.

This is super aggressive I know. But the fronts seemed to fit perfectly. Didn't get to try the rears but I'm really keen to buy them.

 

I'd have to check offset as well, but when I looked I couldn't find a stamp.

 

Is there any way to make this work? I am pretty low and my stock 17x7s are tucked with about 5mm clearance to guard. If I rolled them could I get it wide enough to fit 9"?

 

Sent from my MIX 2 using Tapatalk

 

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...