Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Brembo Bleed Screw - for Subaru Legacy


Bobby

Recommended Posts

1 hour ago, boostin said:

From memory they're an odd size and thread.

Odd?

What are you American? They will be metric like most European stuff.

 

brakes and seats are imperial in lots of cars even if the rest in metric for some very annoying reason.

 

rallysportdirect.com has speed bleeders to fit, they list them as Sti 02-14 and evo 9-10 so sounds like Brembo have a standard size of m10 x 1.0 so metric 10mm thread and 1.0mm thread pitch. That is the same as the 350z etc as well so must be some options.

Link to comment
Share on other sites

7 hours ago, Gripless said:

Odd?

What are you American? They will be metric like most European stuff.

 

brakes and seats are imperial in lots of cars even if the rest in metric for some very annoying reason.

 

rallysportdirect.com has speed bleeders to fit, they list them as Sti 02-14 and evo 9-10 so sounds like Brembo have a standard size of m10 x 1.0 so metric 10mm thread and 1.0mm thread pitch. That is the same as the 350z etc as well so must be some options.

I was more aiming at odd, being different to standard Subaru 2 and 4 pot calipers. 

  • Like 1
Link to comment
Share on other sites

Speedbleeders... The bleed valve on the brakes has a one way valve inside. Normally they are just a hollow tube. 

 

So you loosen the bleeder it doesn't leak immediately, as the little spring in the one way valve stops it.

But once you press the pedal it bleeds as normal, but when you let off the pedal it seals and air can't get back in.

 

You can bleed brakes without anyone helping. It's like having four of those little self bleeder bottles built it. Still need a but of tube and container to collect the mess and not clover the inner guards. Even if someone is helping still prevents accidentally letting air in.

 

799-speedbleederchart.jpg

 

Cut away picture

  • Like 1
Link to comment
Share on other sites

Most USA big brands make them. Think those ones are Russell but even edelbrock make them I think, speed bleeders is even a brand.

around usd$7 each but shipping will kill you from most stores over there as its all ups or dhl.

rallysportdirect takes only 4 days even the week before Xmas. Customs will take longer if you get over the nz$1000 mark including shipping.

Group buy to save on shipping? That or one of the sponsors/advertisers of this site maybe able to get them.

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

Hi All

Sorry for the late reply.

 

I eventually sourced the bleeder screw from Winger Subaru. 

It took 10days to come from Japan.

Bleeder Screw Part no: 26238FE001 - $18.00 excl GST

Bleeder Cap Part no: 26241FE000 - $9.00 excl GST

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...