Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Bp gt 2.0 essential/easy mods?


iludez

Recommended Posts

  • Admin

Rear swaybar for handling. 

Intake milk bottle delete, 3-port solenoid, downpipe/decat and a tune. Not exactly ’cheap’ but that's probably the way to get the best bang for your buck without wasting heaps of money or your spare time.

Link to comment
Share on other sites

Have front and rear sway bars done.
What is the intake milk bottle delete?

I'll look into a decat, can I do it myself.

Rear swaybar for handling. 
Intake milk bottle delete, 3-port solenoid, downpipe/decat and a tune. Not exactly ’cheap’ but that's probably the way to get the best bang for your buck without wasting heaps of money or your spare time.
Link to comment
Share on other sites

  • Admin

Ahh yeah forgot about the swaybars. Underneath the filter box there's a resonator box that can be removed. Gives you more intake noise and apparently mildly better spool.

Decats reasonably easy. I just used hole saws on my drill to drill out the majority and break up the structure a bit then used a long pipe to smash the remainder out. 

Link to comment
Share on other sites

Oh so similiar to the bh that has the resonator box in the guard?

Ahh yeah forgot about the swaybars. Underneath the filter box there's a resonator box that can be removed. Gives you more intake noise and apparently mildly better spool.
Decats reasonably easy. I just used hole saws on my drill to drill out the majority and break up the structure a bit then used a long pipe to smash the remainder out. 
Link to comment
Share on other sites

  • Admin

Similar, but doesn’t bend around into the guard like 3rd gens. Pretty sure the easiest way to get it off is from underneath with the undertray removed.

 

It's the white piece in the pic. Clips up onto the tube/hole on the bottom left of the other piece

C7021BA5-BD88-4EA1-8060-23C0222172B2_zpszjd7mnde

 

Link to comment
Share on other sites

Sweet so just plug up the hole when removed then?

Any links to doing the cat? I've never done one before

Similar, but doesn’t bend around into the guard like 3rd gens. Pretty sure the easiest way to get it off is from underneath with the undertray removed.
 
It's the white piece in the pic. Clips up onto the tube/hole on the bottom left of the other piece
35209095933_b2811dfed9_b.jpg  


Sent from my Alpha using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...