Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Odd rattle


ilikethetuna

Recommended Posts

Hi subaru family. I have a weird rattle coming from my 05 GT, 5 speed manual.

 

It only happens when the car is on, at idle, not moving (or very low speed) and my foot is all the way to the floor on the clutch. Its a deep sounding rattle (so not tinny like a heat shield) and maybe lasts for a second or two then stops.

 

Any ideas? Gearbox mount? or clutch master? Clutching at straws? Thanks

 

Sent from my SM-G950F using Tapatalk

 

 

Link to comment
Share on other sites

Hopefully not your engine thrust bearing.Can you measure the movement at the crank pulley bolt with a dial gauge?Also could be your gearbox input shaft bearing if it’s noisey with the clutch pressed fully down (maybe).Worn clutch release bearing and weak clutch plate springs will rattle with the clutch fully released.

My clutch release bearing or clutch plate springs rattled when it was really cold with the clutch released.As soon as car warmed up noise went away.Motivated me to replace my worn clutch.

 

Link to comment
Share on other sites

Hopefully not your engine thrust bearing.Can you measure the movement at the crank pulley bolt with a dial gauge?Also could be your gearbox input shaft bearing if it’s noisey with the clutch pressed fully down (maybe).Worn clutch release bearing and weak clutch plate springs will rattle with the clutch fully released.
My clutch release bearing or clutch plate springs rattled when it was really cold with the clutch released.As soon as car warmed up noise went away.Motivated me to replace my worn clutch.
 
Thanks Dre. How do I measure that? I hope it's clutch related, and not box related

Sent from my SM-G950F using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...