Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

V5 STI injector recommendation


brucestubbs

Recommended Posts

Hey guys, 

 

Just looking for some recommendations for sizes and brands of injectors for my gf8 build. Really wanting them to fit stock location so I don't have to do a top feed conversion.

Shooting for around 220kw atw and would love to hear from some of you with similar builds. 

Cheers

Link to comment
Share on other sites

10 hours ago, runrabbit said:

FYI - I have yellows, and vf22 and only make 200kw. Injectors are at 95% duty and tuner doesn't recommend going any higher. Would love to find a another 20kw if possible.

 

 

Sounds like something is wrong. Whats your fuel pump and how is it wired?

Factory fuel pump and/or factory wiring won't cut it.

Link to comment
Share on other sites

  • Admin

Phase 2 injectors can be de-capped and have been proven to flow enough fuel for 260kw. They flow roughly 550cc when de-capped. Similar to what non de-capped pinks flow.

 

While you said you're not interested in a top-feed conversion, I have a alternative option which is a Rev D intake manifold, fuel lines, rails, pink injectors, and loom. It utilises the factory V5/6 throttle body and loom, so there's no re-wiring required. Simple bolt-on upgrade and then you'll have loads of injector head room.

  • Like 3
Link to comment
Share on other sites

13 hours ago, RaKid said:

Phase 2 injectors can be de-capped and have been proven to flow enough fuel for 260kw. They flow roughly 550cc when de-capped. Similar to what non de-capped pinks flow.

 

While you said you're not interested in a top-feed conversion, I have a alternative option which is a Rev D intake manifold, fuel lines, rails, pink injectors, and loom. It utilises the factory V5/6 throttle body and loom, so there's no re-wiring required. Simple bolt-on upgrade and then you'll have loads of injector head room.

You've got me intrigued. So the intake manifold, fuel lines, rails and loom from a legacy rev d? And that will plug straight into the v5/6? plus the pink injectors. Sounds interesting, any clue where I could find those around auckland easily, and how much they go for?

Cheers

Link to comment
Share on other sites

11 hours ago, runrabbit said:

Walbro fuel pump replaced oem.

What's the wiring? factory wiring has voltage drop before the pump.

A friend only made 200kw ish with Walbro on factory wiring, it was running out of fuel pump. With the wiring mod it made 230kw

Link to comment
Share on other sites

  • 2 years later...

Bit of a thread dredge here. Random question on the topic of Phase 2 Yellow injectors from V5-6 sti motors. Are these 440cc from factory or 550cc??

 

I have been hearing lately that they are actually 550cc. Tuner said I still had headroom in the fuel system on my stock Yellows at 226kw. 

 

Link to comment
Share on other sites

35 minutes ago, ginganinja said:

Bit of a thread dredge here. Random question on the topic of Phase 2 Yellow injectors from V5-6 sti motors. Are these 440cc from factory or 550cc??

 

I have been hearing lately that they are actually 550cc. Tuner said I still had headroom in the fuel system on my stock Yellows at 226kw. 

 

 

550 in the v5/6 sti

Link to comment
Share on other sites

51 minutes ago, ginganinja said:

Interesting, do you know if this is at 80% duty cycle or 100%? 

 

Or are all injector sizes measured at 100%

 

I think the measure is when wide open. Supposedly the JDM STi runs a higher static pressure as well... 53psi vs 43psi for

the wrx or US spec cars. You can always get them cleaned and flow tested so you know exactly what you have.

Link to comment
Share on other sites

  • 9 months later...
On 4/12/2020 at 5:13 PM, Loren said:

 

I think the measure is when wide open. Supposedly the JDM STi runs a higher static pressure as well... 53psi vs 43psi for

the wrx or US spec cars. You can always get them cleaned and flow tested so you know exactly what you have.

Revival again. Got another project happening. So if this is the case that V5-6 yellows are 550cc does that mean the V7 pink top feeds are only 15cc more?  So basically the same size.

 

Or do the top feed injectors operate better overall giving better fueling?

Link to comment
Share on other sites

9 hours ago, ginganinja said:

Revival again. Got another project happening. So if this is the case that V5-6 yellows are 550cc does that mean the V7 pink top feeds are only 15cc more?  So basically the same size.

 

Or do the top feed injectors operate better overall giving better fueling?

 

I know nothing about the v7 injectors. 

 

AFAIK top feed just gives you a lot more options and much greater maximum flow.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...