Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Rookie engine building mistakes.


Dre

Recommended Posts

Back in the day,before the internet.Decided to put a bigger cam in my Mini.Problem was the only way I could figure out how to remove the cam chain was to remove the clip that holds the chain together.While racing my mates Escort over the Bombay’s,chain let go.Replaced single chain with duplex chain and and installed properly.

 

Or later on when I replaced the short block in my Escort Sport and didn’t replace the spigot bearing.Put it all back together and couldn’t change gears.Engine in and out and back in over a evening.

  • Like 3
Link to comment
Share on other sites

I think I get the idea of this thread - Comment your dur dur engine building or other mod moments for others entertainment and mutual facepalmage 

 

  • When I was 17 I was rebuilding my MY05 KXF250 - put it all back together and didn't torque the cam journals to spec, just tightened them up real good. Started it and the Cams picked up and seized within the first 10 seconds of it running. lesson learnt! 
  • Tried filling and painting a massive stone chip on my bonnet once, ended up getting the whole front of the car painted... I hate painting 

 

 

 

  • Like 3
Link to comment
Share on other sites

Never built an engine however rookie mistakes when I was about 16 - 17 I had a vtec prelude (ow lord) and replacing a front caliper, obviously forgot to tighten the top bolt and was driving to hawkes bay when it flew out the side and caliper had flopped against the wheel and was just grinding 9_9

 

Also when I first painted a car I used a very heavy metallic grey and did not do a ' technique coat ' when you pretty much mist over the car to keep it all similar. rolled car into the sun and it looked like a fricken zebra with stripy metallic. 

  • Like 1
Link to comment
Share on other sites

49 minutes ago, Joker said:

thought the Alternator was the starter once (young & 1st car) pluged it in through the fan & 'tested' it.... didnt wreck anything!

 

If you own a new Mercedes with the 48V mild hybrid system (only new 4 cylinders or the new Inline 6s), that's actually true. No front pulley system too.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...