Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Partsouq don't sell waterpumps/cambelts for EJ203?


tigerstyle

Recommended Posts

Looking for timing belt stuff on Partsouq, but for my EJ203 in an 06 BP5 2.0 NA they don't come up with anything for a waterpump or for a cambelt, either as just the belt or a 'kit' 

Can get the other idlers and tensioners though. Any ideas, am I looking in the wrong place? 

 

Thanks! 

 

Partmaster have this one from GMB which looks ok: https://www.partmaster.co.nz/water-pump-subaru-ej-el-1-pipe-offset-flange-19215?returnurl=%2fproductlist%2fvehicleparts%3fregistrationnumber%3dhmf296%26variantid%3d9878%26make%3dsubaru%26model%3dlegacy%26year%3d2006%26enginesize%3d2000%26fueltype%3dpetrol%26chassisno%3dbp5-107844%26sort%3dprice_desc%26itemcategorycode%3dautomotive%2bcooling 

Link to comment
Share on other sites

Yeah I'd stay with genuine too...

 

A quick search on Partsouq says it might have been an X2111AA280 pump?  I don't know if the X at the front means it's discontinued, but a quick google on that says it's been replaced:

https://parts.subaru.com/p/Subaru__/WATER-PUMP--GASKET-KIT/72841062/X2111AA280.html

 with:

https://partsouq.com/en/search/all?q=21111AA280

 

Usually Partsouq would bring up that info though. A bit odd on the belt too - maybe they don't pay as much attention to the NA motors?! 

 

  • Like 1
Link to comment
Share on other sites

Could always go to your usual mechanic, ask for the parts, and ask for genuine.

This is just my personal opinion - since this isn't a turbo car, you would be fine with a Gates, Optibelt, or other well known OE brand. Same with the water pump. Only thing to note is you don't want the bearings in the various idlers being Made in China. Made in Japan stuff like NSK is the good stuff.

  • Like 1
Link to comment
Share on other sites

56 minutes ago, tigerstyle said:

Thanks all, got around to phoning the dealer and they do the prices on trade special for all, so cambelt kit is $345+GST and waterpump with thermostat/gasket etc is $109+GST

 

Not worth anything else at that price! 

 

Geez! That's a good price!

I'm considering re-doing my cambelt etc if I go Single Turbo. Have to pull it off to get at a turbo oil feed and block it. Definitely going genuine, but depending on price, Gates Blue Racing belt.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...