Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Legacy BPE Suspension Part


Recommended Posts

Hi,

 

Legacy 2005 BPE

 

Can you please help me identify this part on the suspension of my Legacy? Is it the Sway bar bush?

 

Can I replace this myself?

 

https://photos.app.goo.gl/gjjDwCxXGY31fNhm6
https://photos.app.goo.gl/oJ9FPiXcxSp5F1yd7

Thanks all,

 

Donald,

Queenstown

New Zealand

 

 

Link to comment
Share on other sites

Yeah they're your sway bar D bushes and yeah you can replace them yourself, literally unbolt the saddle and the bush has a slot in them so they just slip off. Measure your sway bar and go to your local repco, supercheap or BNT store, they'll give you the part you need. Looking at the pic there is a '20' on one of the bushes so i'd imagine its a 20mm bar, but always measure them just in case. 

Edited by Zeus
  • Like 1
Link to comment
Share on other sites

  • Joker changed the title to Legacy BPE Suspension Part
  • Admin

Zeus nailed it. Consider going to a Nolathane bush, although they can be a bit squeaky, especially if they dry out.

 

As a side note, these can be an easier job if the car is on the ground, or at least has the wheels supported.

  • Like 1
Link to comment
Share on other sites

53 minutes ago, boon said:

Zeus nailed it. Consider going to a Nolathane bush, although they can be a bit squeaky, especially if they dry out.

 

As a side note, these can be an easier job if the car is on the ground, or at least has the wheels supported.

Nolathane now do greasefree bushes, they're a great improvement on that. Most places should do OE rubber replacements for a fraction of the cost too

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...