Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Quick bov help


Recommended Posts

Piping for my front mount is here but I have an issue. My gfb response won’t fit the piping. 

 

yKjX7fD.jpg

 

 

does anyone have one that’ll fit? I’m happy to work something out for straight trade for the response that I have off the car or purchasing. Beer on me if you can deliver since I have the car ripped apart. 

 

nOJBZK4.jpg

Edited by Abomb
Link to comment
Share on other sites

  • Admin

Rude. Pretty sure you can unthread the base and use an adaptor for your pipe size. Think there are three screws on the underside you should be able to see once you get it cleaned up.

Either size it to have silicone tube between them or go bigger and trim the barb off the intercooler and use the base that screws on with an internal o-ring.

 

Give prowholesale a ring and see what he can do, unless you really need it running asap. The guy that runs it is a massive GFB fanboy so knows just about everything that can be done with GFB stuff.

Link to comment
Share on other sites

No screws on this one, there looks to be a couple divets inside for a special tool to take it apart but I don’t have anything that’ll fit. I think I’m going to have to get a flange welded on.

Link to comment
Share on other sites

  • Admin
14 minutes ago, Abomb said:

No screws on this one, there looks to be a couple divets inside for a special tool to take it apart but I don’t have anything that’ll fit. I think I’m going to have to get a flange welded on.

 

That'll probably be the cheapest and easiest way around it. Are you gonna run some extra silicone piping to extend the outlet side too?

Link to comment
Share on other sites

6 minutes ago, Andy_Mac said:

 

That'll probably be the cheapest and easiest way around it. Are you gonna run some extra silicone piping to extend the outlet side too?

 

 

 Yeah gonna have to so I can continue recirculating. 

Link to comment
Share on other sites

I might have a spare Laser cut stainless flange that my brother cut (pretty much a plate exactly the same size and holes as the BOV base). Someone can easily weld a bit of stainless tube on one side and then just join the two with a but of silicone hose and hose clamps and bolt the BOV into the flange. lmk if your keen and ill see if I still have it.

Link to comment
Share on other sites

1 hour ago, Subru said:

I might have a spare Laser cut stainless flange that my brother cut (pretty much a plate exactly the same size and holes as the BOV base). Someone can easily weld a bit of stainless tube on one side and then just join the two with a but of silicone hose and hose clamps and bolt the BOV into the flange. lmk if your keen and ill see if I still have it.

 

 

I appreciate it, the shop that is welding it together took a print of the flange on my bov and off my factory intercooler and were laser cutting it they just didn’t have time to finish it up before heading home. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...