Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

PBMS Group Parts Order


Niran

Recommended Posts

Hey all,

 

Have been having a few chats with Pat from @PBMS about doing a group order for parts from the US. Pat should be able to give us some competitive pricing on big brands parts, especially if we can get a stack of us to order together. Best time to stack up for those build plans on the boil!

 

PBMS can get most parts from all major brands. The likes of:

  • Turbosmart
  • Whiteline
  • JE Pistons
  • Harrop Superchargers
  • Kelford Cams
  • Process West
  • Link ECU
  • ECUTEK
  • Emtron
  • ARP
  • Pure Performance Motorsport
  • Invidia
  • King Bearings
  • ACL
  • AEM
  • Aeromotive
  • Garret
  • BorgWarner
  • BC Brian Crower
  • CP
  • Cometic
  • Cusco
  • DBA
  • DW
  • Eagle
  • Exedy
  • GSC Power Division
  • HKS
  • Injector Dynamics
  • Innovate Motorsport
  • KW Suspension
  • Manley
  • OS Giken
  • Perrin
  • Project Mu
  • Radium
  • Rallyarmor (mudflaps)
  • Vibrant
  • Walbro

 

Basically anything you have had your eyes on, let me know (either PM or comment on here) and i'll collate it all and get us pricing. Send me:

  • Name and brand of the part you want
  • Model no. and qty

 

Remember the more we get on this the better it will be overall. 

 

Big thanks to @PBMS for supporting the club! 

 

Edited by Niran
  • Like 4
Link to comment
Share on other sites

  • Admin
1 minute ago, Niran said:

I'll kick us off. I'll most likely be getting:

 

  1. DBA T3 4000 front and rear rotors
  2. DBA XP+735 pads

For now, plus a stack of other parts if this guy buys my motor. 

 

Personal opinion, but I'd buy Dixcel over DBA. More consistency and better wear over time.

Also REALLY good on the track.

  • Like 1
Link to comment
Share on other sites

Depends on the final price but here’s my list:

Invidia Downpipe Catted Divorced Wastegate w/ 2 Bungs

MODEL # INVHS08SW1DOC

Invidia Uppipe

MODEL # INVHS02SW1UPP
 
Invidia 3in Downpipe to 2.5in Exhaust Adapter
MODEL # INVHS02SWIAPD
 
Could also need a 3 port boost control solenoid ( I’ve only found Grimmspeed tho) and a silicone turbo inlet hose.
 
 
 
Can PBMS also do a super special price for tuning (reflash 2011 WRX ecu) after ordering said parts in the group buy? 😁😁😁
  • Like 2
Link to comment
Share on other sites

Nice list @Omsin

 

Will get a full price for you soon

 

Some suggestions:

- the 3 port, they are all the same. Its a Mac valve. PBMS have link ones which will do the job, or you can try find a mac valve

- don't think changing the silicon inlet hose will do much unless I'm wrong? Better off getting a cold air intake like this:

https://www.rallysportdirect.com/part/cold-air-intakes/aem-21-478wr-aem-cold-air-intake

 

@Dairusire the price of the dixcel stuff is quite high compared to DBA. Haven't heard of anything negative about the t3 DBAs so keen to give them ago. Also they look dam nice lol. Wanted the dixcel z pads but they are 600+ 

Will give these DBA ones a go and report back

  • Like 1
Link to comment
Share on other sites

Forgot 

JE pro seal fire ring head gaskets 

 

PS I have XP pads and I don’t like them. Not great initial bite and feel soft when braking. Soft is not pedal feel but more weak braking performance. They still stop ok but not aggressive enough for me. 
told they can be worn out after maybe two track days. 
the T3 discs seem fine 

Link to comment
Share on other sites

DBA1678XP fronts

DBA1521XP rears


Old ones were Bendix street road track which felt more confident and solid. 
 

they both squeak and squeal though. 
 

I found EBC to be really good before. 

They don’t make the pads I had anymore but it sat between orange and blue. Pretty much orange but higher temp range. 

Ps if you think you may go to new motor then get better pads. 

Edited by Gripless
Link to comment
Share on other sites

On 28 September 2019 at 12:40 AM, Gripless said:

Forgot 

JE pro seal fire ring head gaskets 

 

 

Do they require block machining? I've been looking into The Athena ones! But haven't committed yet.

& does the block require machining for the RCM 14mm-12mm head studs? Probably kill a few birds at a time?

Link to comment
Share on other sites

Athena is JE, same parent company

14/12 mm require only block to have new threads drilled and cut. Heads stay stock. 
 

with any other big studs you have to drill the holes in the head bigger. 
 

only WRC style seperate inconel rings need the groove machines in. 
 

Athena and JE have a ring inside the gasket and no extra work required 

  • Like 1
Link to comment
Share on other sites

6 minutes ago, Andy_Mac said:

I've got Athena ring ones on the way for mine already. Think they're coming from speedfactor. Quite a long lead time to get them into the country.

Yeah that's where I was looking! Do you know the thicknesses?

Pretty sure I'm after 1.6mm

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...