Sign in to follow this  
Followers 0
kamineko

JDM WRX ECUS

2 posts in this topic

 smokn4 said:


got this from JDMVIP.COM:

U8, 2C - 1993/1994 WRX – TDO5-11.47PSI (0.8BAR) TO REDLINE -FUELCUT 14.5PSI (1BAR) - 240PS (237BHP)

W6 - 1993 WRX RA – TDO5- 11.47PSI (0.8BAR) -FUELCUT 14.5PSI (1BAR) - 240PS (237BHP)

W9 - 1994 WRX RA - 11.47PSI (0.8BAR) -FUELCUT 14.5PSI (1BAR) - 240PS (237BHP)

SA (STI CHIPPED) - VER1 STI (SEDAN AND WAGON)- 14.94PSI

SB (STI CHIPPED) - VER1 STI-RA - 13.64PSI

SC (STI CHIPPED) – SAME AS Z4 - VER2 STI WAGON - -12.7PSI (0.9BAR), DROPPING TO 11.7PSI (0.8BAR) @ 6600RPM

FUEL CUT 15.65PSI (1.08BAR)-260PS (256BHP) - 7250RPM

Z4 - 1995/1996 WRX – SAME AS SC- 12.7PSI (0.9BAR), DROPPING TO 11.7PSI (0.8BAR) @ 6600RPM

- FUEL CUT 15.65PSI (1.08BAR) - 260PS (256 BHP) – 7250RPM

Z5 - 1995/1996 WRX-RA - 12.57PSI

6K - VER2 STI SEDAN – SAME AS PRODRIVE-TDO5- 13.33PSI (0.92BAR) BUT PEAKS TO 13.6PSI (0.94BAR) @ 5600RPM, THEN DROPS TO 12.71PSI (0.87BAR) @ 6600RPM- FUEL CUT 15.65PSI (1.07BAR)-7500RPM-380CC

7K - VER2 STI-RA - 13.17PSI(0.9BAR) BUT PEAKS TO 13.64PSI (0.94BAR) @ 5800RPM- FUEL CUT 15.96PSI (1.1BAR)-

PRODRIVE UK ECU (PRODRIVE CHIPPED) – SAME AS 6K – 13.33PSI (0.92BAR) BUT PEAKS TO 13.6PSI (0.94BAR) @ 5600RPM, THEN DROPS TO 12.71PSI (0.87BAR) @ 6600RPM- FUEL CUT 15.65PSI (1.07BAR)-7500RPM-380CC

1C, 3B, V9, V5 , V9, 4B, ALL(?TBC) WRX WAGONS - 10.55PSI (0.7BAR) DROPPING TO 6.84PSI (0.5BAR) STARTS TO DROP @ 5000RPM – FUEL CUT 13.79PSI (0.95BAR) -

thanks smokn4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recent Status Updates

    • Steve

      Hi all. So I've just seen on Facebook about a thing called The Gumboot rally it's on the weekend of the 7th of April. Goes from Hamilton somewhere down to New Plymouth then across to Taupo and also includes The Forgotten Highway which is an awesome road to drive, as I have done it a few times now. If you are interested go have a look on Facebook should be a fun weekend I reckon.
       
      Stay safe on the roads over this time there are some CRAZY people out there who only think about themselves!!
      · 1 reply
    • Steve

      Anyone going to Automania Auto festival tomorrow up at North Shore events centre?
      · 0 replies
    • Steve

      Does anyone else on here know or own one of the crouching tigers?
      · 1 reply
    • Matty t  »  gotasuby

      Help me please Hi iv fitted a dump valve to my vectra c 19 cdti 150 bhp. The 1 I bought was a twinport or receculation valve I don't no just bought and had a go of fitting it my self.  On looking at the car I thought I needed to block the 2nd port so have done bought a t and fitted it on the main intake Of The top Of The intercooler to the inlet on to Of The head.  Ran the bleed pipe and td it in to the on top Of The intake now it's just realeasing through the revs rather than when I lift of it's not because I blocked the other port is it thanks
      · 0 replies
    • WKDWRX

      https://www.instagram.com/p/BPPX4eLDujb/
      · 0 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    37,803
    Total Topics
    535,192
    Total Posts