Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

What have you done to your car today?


Guest keltik

Recommended Posts

 boon said:
Performed TCU reset so I can do a relearn.

Also finally pulled the ABS fault code, looks like it may be the Brake Pedal Position sensor?? Is that a thing?

Have a look through a cruise control installation thread, if I remember correctly someone had a ABS light thrown at them when they replace a break pedal switch and didn't adjust it correctly (too short).

Link to comment
Share on other sites

 boon said:
Performed TCU reset so I can do a relearn.

Also finally pulled the ABS fault code, looks like it may be the Brake Pedal Position sensor?? Is that a thing?

soba's explained it well. Sometimes the switch can fault and have incorrect resistance readings resulting in an ABS code. Might be worth trying a second hand replacement or even a new one?

Link to comment
Share on other sites

 Marky said:
Got half my weekend plans taken care of, haven't taken a manifold off a subydoo before but can't be that hard surely. Is it possible to just unbolt it enough to lift an inch or so higher without having to disconnect errrrthang?

DSC_0785_zps7ow6qvru.jpg

Will need it off completely unless you hack the original intake into pieces. Then IIRC I had remove the drivers side fuel rail to get the original out. Then bend the fuel lines bolted under the mani slightly to get the new intake pipe in neatly without being squished. It also needed some length trimming to fit perfectly:

http://clubsub.org.nz/forum/showthread.php?39690-BE-BH-replacement-inlet-hose-for-TT/page2

a7mY8Zx.jpg

u3i8zxH.jpg

Link to comment
Share on other sites

 Rosssub said:
Will need it off completely unless you hack the original intake into pieces. Then IIRC I had remove the drivers side fuel rail to get the original out. Then bend the fuel lines bolted under the mani slightly to get the new intake pipe in neatly without being squished. It also needed some length trimming to fit perfectly:

http://clubsub.org.nz/forum/showthread.php?39690-BE-BH-replacement-inlet-hose-for-TT/page2

**** that makes my life easier

Link to comment
Share on other sites

 Marky said:
Got the under manifold silicone intake in, that's half a weekend I'll never get back.

On the plus side, holy turbo sucky noises batman! I dunno if it's any faster or not, and I don't really care either

will make a difference if you get a tune. may **** around with a/f s if not, maybe check them with a wideband for piece of mind if your not going to tune...

Link to comment
Share on other sites

did my last service on the wrx before the cambelt change, also only 800 of the loan to go now. checked the cv's as to my knocking noise: no play of cv's, pretty sure it might be poked struts. or on their way.

now: do I go coilovers and cert... or new struts, dont really wanna get coilovers before ive got the 17x8's I want though, as im not overly keen on the re-cert cost lol

Link to comment
Share on other sites

  • Admin
 94 Leone said:
did my last service on the wrx before the cambelt change, also only 800 of the loan to go now. checked the cv's as to my knocking noise: no play of cv's, pretty sure it might be poked struts. or on their way.

now: do I go coilovers and cert... or new struts, dont really wanna get coilovers before ive got the 17x8's I want though, as im not overly keen on the re-cert cost lol

It would be a very, very pedantic policeman that pulled you up for 17x8's uncerted.

My cert plate says OE wheels and I've had 17x8 aftermarket wheels for a long time, never been an issue.

Link to comment
Share on other sites

 boon said:
It would be a very, very pedantic policeman that pulled you up for 17x8's uncerted.

My cert plate says OE wheels and I've had 17x8 aftermarket wheels for a long time, never been an issue.

Ive been pink stickered once for having 16s whilst cert plate stated 17x7...some cops are just out there to get you even though they are still correct.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...