Leaderboard

Was driving over to Eketehuna yesterday and between the track and Pahiatua i spotted a black legacy approaching from behind at speed. I was doing 110 and the bh Gt passed me as if i was a rolling chicane. So i speed up a little just to see how fast he was going and followed for a couple of minutes at 130ish. I then backed off and he disappered into the distance. After another few ks the legacy appeared to be slowing and i caught up again. Approaching a right hand uphill corner I noticed a huge cloud of white/blue smoke covering the road. I had to slow right down to see through the cloud and 100 meters up the road was the legacy idling away with smoke billowing from the exhaust. Some one will be looking for a new turbo. And thats my sharn...

So it's been a while. This is a v7 sti standard crste motor with second hand standard heads off a v7 sti. Supporting fuel system and a link ecu. Fmic and bolt on twin scroll blouch 3.0xt-r turbo. We wanted 400hp with bolt on turbo on pump gas. This is I think the limit of what is achieveable on a bolt on turbo. It is at 26psi to achieve it.

Took my car in for its lvta cert inspection today. The certifier was happy with everything and it passed, just need to do some paper work and wait for the plate to turn up. I’m so happy after 5 months of trying to get it looked at!

Passed cert with the GRB

Soooo did a thing again. Sold my RS4, and thought I'd try find a cheap but well modded car to drive until the V11 gets finished. Enter the 2002 Prodrive STI. All the right bolt ons including a link ECU, TE37s, semi slicks, new Teins and making 220kw! Only catch is high 220kms. Looks to be well maintained mechanically though! Body requires a bit of TLC. All in all, great car! Building up my photography skills too haha.

So I wanna get the race car rolling so I can get it to a mates warehouse with the intention of it going up on a hoist... We will have a heap of space to work in when it's there too so hopefully this keeps the motivation up lol Anyway: put the front lower control arms in and discovered I'm missing a whole box of nuts and bolts.... so instead of a castle nut on the ball joint I have a wheel nut (dw this is only temp so I can get it rolling) Wanted to see what the brembos going to look like (and yes i know that's the drivers side caliper... the other one was under three rotors in a box) Turns out I don't have the brembo caliper bolts either.... that ones sitting there precariously on some undersized bolts... Next we started putting doors on, put the guard support brackets on and then the guards \ Next on the list is to order a bushing kit for the rear so we can put the subframe etc back in This will then mean I have a roller!

Too excited not to share. Some of you will have seen I sold my old type R.. Only reason was because I managed to win this unicorn at Auction! The v6 type R LTD!! Only about 580 made, arguably the rarest subi you can get next to the 22b. Few things made it 'affordable' haha but I don't really care as i'll keep it forever: Its an R grade - but was just in a minor frontal (cross member, front support, guards and bonnet replaced, no apparent chassis damage). Still registered in Japan meaning its of a good standard. 78,000kms!!! It is modified (WIN WIN WIN) - GDB 6 speed, engine and GRB brembos and maybe some other drivetrain components (hence the UGLY AF wheels) Looks very very tidy if not for the R grade. So dam stoked to snag this. Been looking for one for over a year! Anyone know what wheels those are? Trying to figure out if the hubs were replace to 5x114.3 or 5x100 based on those.

Finally got around to bringing this home from DTech. Just need a few more accessory pieces and it'll be ready to go in.

Well, this has to be potentially one of the most frustrating weekends I've had with Subarus in a VERY long time. warning. LONG read. tl;dr LOTS of things don't go my way. Things broke that shouldn't have broke. I consider insurance fraud. I fixed it after putting in WAY too many stressful hours. I'm definitely not selling it now because it owes me WAY too much money. Also, @SAS Richard, thank you for the help on identifying the issue from over 1200km away Man knows so much about Subarus it's not funny. Kinda is, comical but guru is literally a thing. @94 Leone Dude, you're legendary. Your assistance in getting this flame heap of a turd running was absolutely critical, I can't thank you more. lastly, take a moment to thank people who share information here on clubsub. You're all awesome. I wouldn't know anything or how to fix much without this community or its support. So cheers all. =================================================================== Got my Legacys engine back and started putting it in on Saturday, engine in the bay in under an hour. Going really well! I thought Start bolting things up run out of light so call it a day. Good progress was made. Sunday brings us getting most of the last things bolted up! all ancillaries, coolant system, etc all hooked up ready to go! and nothing It cranks but won't do crap. Check fuel priming to injectors. Yeap got fuel pressure. Check Spark? Yep got that too. Breathe in? Yep got air. Pulled spark plugs and they're cleeeeeean. wtf, maybe fuel injectors gummed up from sitting for nearly 3 months? Drive home in the car I've borrowed from a mate.... Literally pulling into the drive way I hear a sound no-one wants to hear. The sound of pads having worn through and being metal on metal. Check the brakes and confirmed. They're boned. Well, guess there goes by back-up for getting back to work tomorrow morning "Hey boss, look... I'm having a really bad weekend" MONDAY: Out they come I'm off to petroject and say 'please test and clean if needed, need done now' 30 minutes and $75 later. "Good news and bad news. Good news, injectors are perfect, like spraying way too well for what are 20yr old injectors. Bad news is, your fuel system issue your problem with the car not starting. I did replace the o-rings though. They were perished " WHAT THE HELL! Check crank sensor and cam sensor, also, fyi, if you've got a multimeter you can test these and for subarus they should come out between 1.5-3 ohms. Mine came out bang in the middle 1.9ohms. Well if that's not the issue.... *Looks at the Crank Sprocket* "God dammit" After confirming with online parts numbers for my car, my crank sprocket was the wrong bloody one. Drive to pukekohe from North shore and back. remove cambelt, put on the right sprocket. Go to install the last idler threaded the bolt aaall the way in by hand, went in really nice, just to tighten it up a smidge before hitting them with the torque wrench... aaaaaand righty loosey. Pulled the ENTIRE thread out of the block. Kevin comes in clutch, delivers me a M10x1.25 helicoil kit at 6:30pm at night and install the helicoil that night, in the dark. Tuesday aaaand I put it back to the absolute minimum I can to try start it. First try, does it even count if you didn't hit the starter? ignition on, fuel pump prime and I hear the unmistakable sound of fuel pissing out on the ground. Oh look, an injector seal is leaking. Pull both right hand injectors and looks like one must've gotten an o-ring JUUUUUUST too smol. Back to petroject, they give me new o-rings, bang em back in the car and sure as heck, it starts up thankfully not spewing fuel everywhere. Big yass. Only to be shot in the foot 40 minutes later when I notice that the clutch ain't doing crap. and that ladies and gentlemen, is where I wasted the next 6 hours trying to bleed it out, and fix what can't be fixed. A quick visit from a friend of mine who did this sorta crap for a job, "you're an idiot sandwich mate. You've got a blown Master Cylinder....." and that brings us to our Finale. Wednesday. up at 8am. Down over to Grey Lyn for rotors and pads for the other car as I'm thinking maybe it's time to eat a slice of humble pie and try fix the lowest hanging fruit issue first and brake fluid for my legacy and this loaner car. Friend from giltrap gives me a buzz while I'm driving "You need a master cylinder aye? I can get you a cheap one from PartsMaster for $80?" You know I'm all about them deals. pick it up, shoot back to the legacy, and I sh!t you not, that thing is bolted up bled and working in under 25 minutes. Quick test drive.. To hamilton for work?? Lets take all the tools.... Runs, drives and oh god it was so worth the stress this @$$hole has put me through haha. Guess it's just in time for a wash eh? Oh... Hey weather system.

Saturday, Well, engine came back out! Fixed the misaligned clutch. Put the oil drain on, with heat shielding. Deleted the GDB clutch bleed setup in favour of single braided line. Got that around the wrong way. Fixed that. Engine in, wastegates off to check spring pressures. Now both have 7psi springs. Flumbled around trying to figure out how to get it all to fit in there. Turns out, turbo on first, then engine in, then downpipe, then wastegate dump pipe on wastegate, then wastegates in place. She's a little tooooight Also fiddled with fuel lines. Plumbed the -8 AN lines to the stock body for the time being. Then today! Get under the car to install exhaust manifold on engine. Promptly get it half on, drop it on my face, break my nose. Mint. Hospital check because recently had surgery on my nose and would rather sort that now lol. Reattempt getting manifold on without breaking nose again, am successful. Yuss. Replace the fittings in the wastegates, because old and cruddy. Cut heat shielding to size for boost lines. Run vac lines for wastegates. #goodenuff Sent from my SM-G960F using Tapatalk

Not my car and not a subaru but I have a huge passion for detailing and spend 6 hours doing a full 3 stage correction on my mates evo 8 for him. Absolutely no messing with photo that gloss is a raw file [emoji91] Sent from my SM-G975F using Tapatalk

Many many many hours of 3 stage detail, wet sand, compound, polish, wax then sealant after hitting the wall at manfield plenty of battle scars but I think it turns out really well for not paint touch ups. Sent from my SM-G975F using Tapatalk

Joined the 3.0r gang a few months ago, scored a 05 BP to daily from a cop, has a bunch of STI stuff on it, brembos front and rear tensioner puller decided it didn’t want to live anymore the other day so ordered a new kit from Subaru, installed it then justified buying a new torque wrench for one single bolt, now it’s back on the road ready to get tailgated by all those level 2 people

My wheels are done with being Media blasted and now Powder Coated by @chulozumo! Ho boy do I think that's an improvement over the silver that they were! So. The before And AFTER!

Lowered it, new rubber and tinted the tailights.

Searching thru some old videos on the hard drive My Na Forester SF5 snatching my mates Safari from a mudhole Lol this is just one of the reasons why I love subarus

good grief

Installed my blitz boost gauge today with a zero sports holder very pleased with how it looks! Plus car is doing 14psi which is perfect

Cleaned the GC8 and got it all ready for the Flatnats track day tomorrow!

Entered ruapuna track attack, lots of fun but was the only subaru there out of 40 odd cars!

Started putting parts on the race car.....

I bought myself an engine. Specifically the sleeved 2.2L stroked to 2.35L that was for sale on here. I'm now sending it to SAS for a freshen up. Will run my v8 Spec C heads on it, rather than the v4 STi heads. Will get some cams for it too. @Niran Who's gonna hit 400kw first bb

i didn’t do anything myself but I did receive some photos of turbo installed on the mock engine in car, down pipe next. Things getting more exciting, hopefully not long to go now.

Hey guys, Just thought I would give and update as its been some time now. I managed to find all/enough evidence to satisfy NZTA for the special permit. The car is now registered and driving on the roads. If anybody is interested in having the information I would be happy to share what I have. Thanks, Josh

Hi Guys. My vortex is for sale if anyone is interested? Ta https

I made a map for the South Island locations: https://www.google.com/maps/d/viewer?mid=1PwR48eNngNTRbqxgoCacV3TK0kPd5C4a&usp=sharing

Bought a new old thing

Hey everyone, I'm new to Sub's, I use to be a Nissan/Toyota man, but then kids happened, life happened and money was dry. However finally had an opportunity to have a play. Brook my best mate has been a sub fan all life and knows the EJ's like the back of his hand, he is an aircraft engineer. However I'm the noob and on a fast learning curve. Anyway if you interested in following our build, follow us on our youtube channel. Here is a good intro vid, Possum Borne Motorsport is doing the block work, we just letting them free rein on the flat 6. p.s. Excuse the armature quality camera skill, I'm new to doing this kind of thing, these are raw videos.

Got a tune on the Forester today (bone stock) 133.8kw > 162.5kw A nice increase in torque Car feels completely different 😁

Well, the engine is back in my Type RA. Sort of. All in all, that turbo looks reaaaal at home. excuse the mess that is the engine bay. Should maybe have it running next weekend. We'll see how motivated I am haha. It'll need to come out again as the darn clutch didn't line up properly, and when I went to pull the engine back out to fix it, the hoist decided today was the day it blew it's seals.

New shoes, just in time for rainy season 😄

If only it was that simple. First payment was supposed to come in on Monday. No money, checked again today. still nothing. So i called the ministry of justice and asked what the next step was. Turns out that the attachment order was served on the 12th of June. On the 18th of June she filed for the benefit. So we can all see the problem there. So back to the court i went. I had to file yet another attachment order in order to get money from her benefit. But i didn't stop there, i don't really want to say what else i've done in case in case she is lurking on here, she is pretty into her cars so it wouldn't surprise me if she's on every forum. What i can say is that its totally legal because the court provides it as an option. As much as i have been told to drop it. Im not stepping away and id like to thank all of you for supporting me to do this. Oh and for those counting. The bill is now almost $4000

Got the new wiring harness for my Type RA. Good lord this harness is tidy. This is after just a very quick nasty throw it on the motor. Much happy haha. Sent from my SM-G960F using Tapatalk

Got this cool custom pulley cover and chucked it on Sent from my SM-G975F using Tapatalk

Holy crap, i'm sitting on a goldmine! !

Right, so a little update for those who care. I've finally filed an attachment order to be put onto her pay and its been approved. The business shes works for has been ordered to deduct $50 a week from her pay and send it to me. From my calculations thats 72 weeks if the payments are all made and on time which means I might have some spending money for Christmas next year. The attachment order states that its up to me to make sure payments are coming in so a few calls to her place of work might be made. And while $3580 might not be a whole hell of a lot to be fighting over for the time its taken and will continue to take. i think an example needs to be made so the next person doesn't get let off so easily. Sent from my SM-G980F using Tapatalk

Well, she's here. A wee bit of rust around the boot, about what I expected, and there's a bit sort of settling in the corners of the windscreen, but that's not bad from what I can see and easily enough 'fixed' for the time being. Runs and drives well. 4wd engages and disengages happily. Yeah, basically just rust and clean up. Pretty happy tbh

Serviced the donor car I bought for the race car. Old oil flushed. New filter, plug washer and oil. Radiator flushed and filled with fresh coolant. Trans was completely empty so filled with oil. Brakes bled with fresh fluid so they actually work now. Discovered the old fuel filter had been bypassed, so installed a fresh one and hooked it up. Pumped the old fuel out and put some fresh 98 in. Then checked base fuel pressure and adjusted slightly. Fixed a few other little things like the water temp gauge, the intercooler rubbing on radiator support and the exhaust rattling on towbar. Found the steering rack leaks like a sieve. Thankfully the one on the racecar doesn't. So will leave that for now. The exhaust is pretty cooked. The bottom of the downpipe is about to break off from the rest of the exhaust. Going twinscroll anyway so not needed. Also noticed its missing 3 of the 5 nuts holding the downpipe to the turbo lol. Anywho, took it for a short test drive which went well. 12-13psi on a short pull. Sounds pretty healthy and makes cool turbo noises. Next on the list: send a can of upper engine cleaner through it, change the plugs and check rear diff oil. Then I'm basically ready to pull the engine from the donor car and start getting it ready to put in the racecar.

Nearing two years later, same car, no more lip:

Took the car out for the first time since polishing and coating it during lock down.

Exhaust turned up , couldn’t wait till tomorrow so after work it was😂

Hey team, Mrs is away this weekend trying to fill in some space - anyone free this weekend for a get together? wont lock anything in stone yet but if decent turnout is keen for a little drive up to Ohau I am ok opening up my home to the OG members (New members welcome if long standing members can vouch for you) sounds a bit stink but opening my home up I can only be wary. Could be keen to crank a bbq, have lots of land with landscaped parts make for perfect back drop in photos Let me know your thoughts - could be keen to take the car for a cruise if people dont want to travel up these ways and once we have some people sorted I will make a FB event as we will most likely forget hahaha

Bought a new one. Black 2006 STI v10

Yeah that's a realistic power level for a TD04. Safe limit on the box will come down to how you drive it, but there are plenty of GC-era STIs running 5 speeds with around that 280whp mark without issues. If you launch the car and drive it hard, you'll break boxes with factory power. It's not like they hit exactly 293.2hp and all the teeth fall off the gears.

Don't have any of the WRX this time, and havent gone to the south island yet, so only have these from one trip.

Back in the land of the driving!! Leone got its wof wednesday, not before first getting a $200 MDC parking ticket for no wof... She's pretty for a 30 year old car. Not bad considering it hadn't been on the road in 4 years. Parked next to a Brumby, because it was there.

Considering you had basically written the money off, that's like.... a dozen free beers and a couple of free good steaks every week for 18 months. Bloody result.

More superfluous mods for an Outback. Managed to find a Prova Eifel carbon intake duct (http://www.prova.co.jp/products/intake/ksg9b60000000hze.html) Dunno if it gives any more power, but it looks flash as fk XD

Got her some Vossens wrapped in Michelins PS 4S. 9.5/245 front and 10.5/285 rear

Let's just say the engine wasn't too happy after the oil filler cap was mistaken for washer fluid cap... She's seized solid now... 😬