Steveo

Yeah no point doing it half arsed, can get a complete cambelt kit belt, tensioner, idlers etc and seal kit for under $600 trade price. And will do all the drive belts while I have them all off. Cheers for the input though guys.

Sorry mate, probably confused the situation a bit. Haven\'t done any cambelt related stuff yet that\'s what I was asking about. Cheers.

Cheers Funky, pretty much all the other 100,000km stuff has been done when I brought it, changed all gearbox oils, complete coolant flush and changed plugs, fuel filter, new brake and clutch fluid etc. Had a really good go over when I brought it at 65,000km\'s. Yeah I might just bite the bullet and do it, can do the work myself and with trade prices on parts would only be about 600-800 bucks. Just interested on what peoples thoughts were.

Hey guys, Kind of a random question that I might already have answered myself, but just thought I would get some other opinions. I have a 2004 Subaru WRX STI, now its only done 71,000km\'s from new, and it doesn\'t appear to have had the cambelt done. I\'ve always been under the impression that normally you just change it at 100,000kms and your away laughing, but recently I\'ve been told there is a age limit. First call I made was to Subaru and they told be 100,000km\'s or 3 years which ever comes first, so if that\'s the case it\'s well over due. Then I remembered I have a workshop manual, and it states 165,000km or 8 years which ever comes first. Which still makes it slightly over-due as its a 10 year old car now. Just wanting a bit more input as I was intending on selling it all going to plan. But do you guys think I should do the cambelt for piece of mind I get trade pricing on Subaru stuff so the cost won\'t be to expensive. Any input it appreciated, cheers.

I wish I kept it, so you\'ll regret selling it too. I recon you\'d get $6k-$7k only because it\'s my old car and I know the history of it ;D

This site is very helpful, hopefully this link will work http://ken-gilbert.com/wrx/STi_Manual/index.htm I run Penrite Pro Gear in mine, but it\'s all personal preference when it comes to brands.

Work mate just sold his Evo 7 and brought a black Evo X, it\'s the kinda car that grows on you. But stock they look pretty average in my opinion. But I guess everyone has different tastes.

Agree with the Legacy statement, bit boring to be honest, slower, less aggressive looking, more electrical aids. Hopefully the STI version has a lot of changes. More I watched the video the more I like my Version 8 STI.

Myth or not, I ran a K&N panel filter in my Legacy and needed to replace my AFM. I put it down to the age/km\'s on the car and thought nothing of it. When I brought my V8 WRX I ran one in it less than 1000km\'s after fitting it (not over oiled or anything) same deal needed to replace the AFM and the car had only done 65,000km. After spending $310 on a air flow meter I wasn\'t willing to run the risk again, so now have a dry type HKS one. I realise there is so many different factors to take into account, but in my own opinion I wouldn\'t run one again in less running a link or similar, and doing away with the air flow meter. So on that topic I have a slightly used K&N panel filter that someone can have for $50 + postage.

Timing out by one tooth?

Miss my old Legacy, glad it\'s getting wel looked after. Owner before me had changed around some of the vacuum lines (less VOD) not 100% sure what\'s been done to it. But if you turn the boost controller off (not recommeded) the boost climbs quite high it\'s like theres no factory control going on. I never really worried about it, as is fine with the boost controller on and pulls well with stuff all VOD. Just keep it in mind.

Hoist was finally free at work, so got all my gearbox and diff oils changed. My cars only done 65,000km and was unsure if they had been done at all. But the old oil was still a yellowish colour, at least I know it\'s been done now though. Also changed the antifreeze, and replaced the air flow meter, and got rid of the K&N air filter that was in it and replaced with a HKS dry type one. So much easier using a hoist as opposed to axle stands and a jack. Next issue I have to sort is knocking rear shocks, it\'s on a V8 STI WRX I\'ve been told that regreaseing them works with some success.

Yeah sorry I was talking about V8 one, I got told to expect well over $500 so I was quite surprised with it being a lot cheaper. Just thought it might have been some random info someone might have liked to of known.

Sorry ignore the O2 Sensor comment I made, while a O2 sensor can cause issues your right it won\'t effect the air flow meter at all. Priced a genuine AFM today and was quite surprised apparently they have come down in price and are $352 Inc GST. I know this money could be put to better use getting a link, or similar. Biggest issue is my location deep south, no one down here I would really trust.

Just had another thought, you don\'t have any leaks / splits or such in your intake. I know mine had a small split that could have been letting dust in on my Legacy, which I replaced as soon as I noticed it. Also can a dodgy O2 sensor kill a AFM, just wondering if that might be causeing you issues. Another silly question, doesn\'t have a aftermarket BOV (wouldn\'t have thought so being a auto)? Keep us posted if you uncover anything, as AFM definatly seem to be a weak point on pretty much all Subarus. Haven\'t been game to price one for my V8 yet, as I think it will be pretty expensive.