Jump to content
Please check your junk folder for registration emails ×

SIRREX

General Member
  • Posts

    24
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by SIRREX

  1. What Kent did around ten years ago was pretty cool, 10sec 1/4 with a stockish turbo and plenty of nos is no easy feat. It’s also not everyday a Subaru runs a 10sec quarter or even an 11 with the amount of supposed 300+kw Subaru’s out there these days. There would be less than ten Subaru’s in nz to have gone 10sec or faster. We are pretty proud of what the car has achieved so far and look forward to going quicker. 

     

    Cheers Matt. 

    • Like 6
  2. I know that the v7 wrx loom I'm using came out a car running avcs. 99% of v7's i come across at my work have avcs. All jdm v7 wrx and sti have avcs it's only the singapore/ Australian spec v7's that don't have avcs. There are a few pins that I don't know where they go and my wiring diagrams don't help me . One that is confusing me is b137 12 on my v7 sti it has 5.8v going into the ecu from my research on forums it says this is from the alternator but none of wiring diagrams can confirm this. Tomorrow I will be checking the inputs on another v7 sti just to compare.

  3. It cranks over with starter motor, I've hard wired the fuel pump for now so it runs with the ignition on but has no spark, coils have power and earth with continuity for the trigger going back to the ecu, injectors have 12v supply.haven't checked for injector pulse yet. The car is not mine it's a weekend job I'm doing and the link g4 is a v7-v9 plug in out of my personal car.

  4. I've been doing a wiring swap on a v2 sti ra and I'm having trouble getting it running on the stock ecu, funny thing is when I plug in my g4 link with a stock base map she fires up and runs mint. Any help would be much appreciated and open to ideas. I believe I have a wire missing for an input to the ecu or out of shear bad luck I'm using a loom designed to run an immobiliser.

  • Who's Online   0 Members, 0 Anonymous, 70 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...