jonossiksilvia

problem is fixed now fingers crossed. the idle air control valve that they replaced happened to be the wrong one for the car. something about silver sticker vs blue sticker. couldve saved a few weeks labour for them and them paying for a auto sparky. Cheers all

cheers rosssub.

the car revs smoothly while it does its hunting start. Thanks Ill will suggest that they look at the fuel pressures. is there a sensor on these so that the ecu does see the pressure?

yeah i havent paid a cent for any work. it started doing it a couple days after getting it. Its a really good car otherwise so torn on deciding what to do. hense the post here incase something has been overlooked

Hi all Car: 1999 impreza srx hatch Manual 119xxxkms stock standard brought from dealer with 3 month warranty Problem: First Cold start fast hunting from 700rpm to 2000rpm does this about 4 times them settles to normal idle. Car runs perfect other than this problem Car has had the following done by crowesport and advantage auto electrical Cleaned tb and iacv tried a known good iacv valve cleaned the afm tried a known good afm new coolant temp sensor Checked for vaccumm leaks swapped ecus all wiring and conectors checked. a efi relay was replaced (slightly low voltage) All sensors parts etc appear to be working correctly when the have their monitors plugged in Still no change on cold starts after 3 weeks at the above shops. Car does run tgv on the intake runners straight after the tb Anyone struck this issues before and it not been the normal parts causing the issue? At the point of wondering if should ask for my money back but the car runs great other than this problem hope someone can help. Thanks

have you put in the required parts yet? if not then i'm sure that's why it says its not active

I also have done this. only thing that doesnt work is the cruise control lights but all control functions of the cruise control works

yeah facelift models need 5th digit. is handy feature when keys to far away

usually anything under 50ma or 0.05a is normal. car alarms will raise it as well.

how much milliamps is being pulled while the car is off?

Does on mine

yes led in cluster. shining torch on cluster where lights are meant to be shows no wording at all so cant even pull cluster to pieces and fit the leds http://clubsub.org.nz/forum/showthread.php?42250-Fitting-cruise-control&highlight=cruise+control

beeping on cold mornings is prob the ice warning. mine does it when we have a frost. comes on when temp dorps to 3 degrees or lower. beeps with door open, no seat belt, handbrake on when moving. also beeps low fuel. annoyingly you can set time, date etc in the facelift clusters but noway to have it show the time (seen mine has factory nav which they used to display the time). Same boat with the cruise control. it works but no cluster lights and cant fit them.

be quite good to be able to get a list of the features that can be turned on and off either diy or through the subaru monitor system

yeah 8 pin plug. i had to merge my radio controls with the cruise control pins. Here is the auction i brought: http://www.ebay.com/itm/231155468253 In terms of trip computer. mine is a facelift model doesnt have the meters above the radios. all meters on screen in tacho gauge

this part i ordered for brake switch: https://partsouq.com/en/search/search?q=83370AA001 search ebay for the controls or for more $ can get through partsouq.com aswell https://partsouq.com/en/search/search?q=83154FG040

got the control buttons from ebay and the genuine brake stop switch from partsouq.com. both parts cost a total of $76 landed

according to the manual they are leds and they cant be replaced. not sure if i can remove the cluster as read can cause issues as car has factory imob and alarm system

So bit of a update. i have managed to get the cruise control working out of share fluke. the functions work but i get no cruise control or set light on my cluster. Have done the diagnostics on the cluster which lights everything up and even trying that no lights appear. Any ideas? wonder if cluster needs to be programmed to show the lights?

Wouldnt think the clutch switch would be problem. car is auto and wiring diagrams show the clutch switch connection doesn't exsist on autos.yeah i thought it was strange getting No cruise light

cheers guys. will have another look at fuse boxes etc. planing on contacting gotasuby anyway - i wanna see what he can do for the car

I'm having some issues getting mine to work: 06 legacy 3.0r wagon si drive auto Fitted cruise buttons fitted genuine brake switch didnt do any type of software update upon hooking battery back up Getting no cruise control lights at all on dash hooking up freessm to car tells me the following Green tick by cruise control on left hand side cruise system is saying on all buttons and brake and stop switches are working as freessm picking it up. clutch is saying off though. Any thoughts people? Just done a round trip 1000km in 2 days and woulda been handy having it going

thanks for updates glad you got it sorted. my controls should be here in the next few days hopefully and ill post up my results on fitting it (hopefully same end result as you richnorm)

ok had another closer look at pics and think camera flash made look blackish. so i have brought that one. ;D