scylar

this... but chassis damage i would be inclined to agree to have a specialist to have a look at that

if i had money i would grab that straight away as long as its in good condition even with minor things to fix

i got me some black silicone that is used for the windscreen from repco.. ive put them on the part where there are gaskets but there is still a bit going through. i will try again when it stops raining there are a few hard to reach places in there so i guess i will have to do some by hand lol

guys, my headlight has got some condensation on the inside and ive read that i need to reseal them.. question is which sealant do i need adn would it be available at repco or supercheap?

perfectionist doing a perfect job.. cant wait till its all put together man.. great work

dont you just hate that when it happens.. your already a fair bit away from the guy and CEL lol.. hope its nothing serious

good one mate! time for your pic!

put on new headlights as the newish ones got backed into by some shmuck who dont know how to park

no go fast bits at the moment. just trying to shape her up

not a perfect replica of the pic in akl zoo but i guess its close enough ;D now this is the only pic of my car thats got a landmark

Got some tyres for the enkei\'s and finally found a cheap sti diffuser ;D

do you scrape at the back or fronts? i will be running the same setup soon.. 17x8 +35. if so id start looking at rolling my guards

hb3 ;D

If all else fails ill find an auto sparky and get this sorted lol

The high beam is a regular h3 bulb. If you have the lightwerkz harness then plug the socket with the yellow rubber on the h3 bulb

Yip, both straight to chassis. will give it a try and see.. hope it works or im buying me some bulbs lol Trust me, afaik I\'m right. ;D so funny thing today i just tested it with the suggestion but didnt work. i bought me some new bulbs too just to make sure and still no go.. :-\ anyone got a spare ballast i can test on my system? lol

will give it a try and see.. hope it works or im buying me some bulbs lol Yip, both straight to chassis.

ok wil give that a try.. what would i do to the black wire on the headlight itself? ground it to the chasis as well?

basically i left this alone and tapped the black wire on this to the chasis

yes i have a black ground wire coming from the triangle shaped socket on the ballast but id doesnt connect to the ballast itself. its just screwed on the bracket. what did was tapped the black wire that comes from the headlight (black wire coverd by orange wire cover) to the chassis and left the black wire from the ballast (black wire which is screwed to the bracket) alone

checked that and its working.. tried to stuff in the original headlights, went on fine.. used the a light tester and was still fine

yeah i did, i only used one pair which was the right side on the first stuff up.. but could be that too.. i used the other bulb and other ballast on the next try. still nothing.. would the bulbs be affected as well as the ballast when it blew?

yes checked. i basing from that pic orange is on left and brown is right. swapped and they didnt blow... cant think of anything wrong.. what can you suggest i do next?

yes i have the orange and brown instead of the blue and black then i plugged it red to orange 1st and brown to black, fuse blew, now red to brown and orange to black. nothing is happening. changed the relay just in case still no go

no go on that.. changed the fuse, relay, still no go.. wonder whats wrong.. its just the low beam thats not working