shadywrx

Yeah man that's exactly the plan, am on the looks out for some 2nd hand 17's! Not sure I brought it with a blown engine from turners few years back now!

@Niran From memory 18 x 9.5 225 x 35

Nah all good man, Yeah the stretch is on the limit, will go slightly wider on next set, Has seen 4-5 track sessions though and no issues at all. Am wanting to get a second set of 17's with semislicks eventually when the budget allows.

Thanks man has been a never ending project last two or so years! Just over 1100 per year with NAC. was with state but after i mentioned the cage they went... uhhhh ummm hmmm best talk to NAC now =P link from first hill climb event over the weekend, sounds alot better in person! https://www.grumblo.com/video/subaru-sti-with-racing-exhaust/1669

Sits just under 280 on 98

67mm off top of my head! Yip factory heads and cams at this stage. Thanks man long time coming!

323.5wkw 535.8Nm Model: V7 Sti Displacement: 2L Mods: From recent insurance list haha! -Tomei Arms M8625 turbo -Tomei silicone turbo intake -Tomei Extreme titanium 3” exhaust -Tomei extreme up-pipe -Tomei semi-tuned headers -Ktech manifold spacers for flipped manifold -70mm Alloy throttle body -Ktech carbon fiber hood vent -Tomei high flow fuel rails + Braided parallel line fuel setup -Tomei fuel pressure regulator -LDS cold air intake with K&N high flow pod filter -Misimoto cold air box -LDS catch can & water reservoir -LDS power steering tank -LDS header tank -LDS overflow tank -Wiscoe .5 oversized forged pistons & rings -Eagle forged con rods -New v4sti closed deck block -ACL Race bearings -Link ecu G4 + V7 sti plug in edition -Link Dashpro2 digital ecu display -Link ecu GPS antenna -Link MAP 4bar sensor -Link IAT sensor -Link ethanol sensor -Link boost solenoid -Shadow boost, Oil pressure & fuel pressure gauges -Rota P1 18 x9.5 wheels -HID Halo headlights -LED tail lights -Mishimoto front mount intercooler & piping -GFB Response blow off valve -Invida 3” catless downpipe -Bosch 1600cc High flow injectors -Roll cage -Hella series horns -6 point NZKW harnesses -Bride low max fixed back seats and adjustable rails -D2 Adjustable suspension -Dixel race slotted rotors -Dixel race brake pads -2l Swirl pot surge tank -DW 250L fuel pump inline -AEM 320L high flow in tank pump -Epman inline high flow fuel filter -AGM Dry cell battery (relocated to boot) Fuel: E85 Tuner/dyno Chris wall

Sorry yeah I was meaning nzms. No worries. Cheers

Hey man, Will there be a scruitneer present on the day? Cheers

Hi All, I'm just completing my V7 Sti build. I've got the cage and harnesses installed and homogenized. Just needing a scrutineer to check it all off including new fuel surge tank system. Cheers