Inked

Subscribed Member
  • Content Count

    736
  • Joined

  • Last visited

  • Days Won

    24

Everything posted by Inked

  1. Awesome cheers! Yeah the team at Kaizen are known for their rollcages and know i want to extend it later so have set it all up for that. Should be good though cant wait to use some harnesses at the track next event Sent from my SM-G975F using Tapatalk
  2. Ahh sweet I don't have a lot of knowledge more went with the company who have a good reputation building them. So when you were talking about the side intrusions are you meaning going to the front? Or for the rear. When implementing them don't you need the log book etc Sent from my SM-G975F using Tapatalk
  3. Cheers mate for the info! The rear cage will be the main hoop a harness bar with the cross bar through it like the photo below i am not doing side intrusions etc at this point but will be lioking to go full cage later on [emoji16] Sent from my SM-G975F using Tapatalk
  4. Cage going in!! Sent from my SM-G975F using Tapatalk
  5. Haha yeah the water blaster has its own attachment. But I went straight for a proper foam cannon after some youtube research [emoji1787] foam was thick as and stuck for ages but did make a hell of a mess on the surrounding areas haha! Sent from my SM-G975F using Tapatalk
  6. Played with the foam cannon today, sucker for buying stuff like this. But so fun [emoji2357] Sent from my SM-G975F using Tapatalk
  7. Got the strafe design diffuser on Sent from my SM-G975F using Tapatalk
  8. Got this cool custom pulley cover and chucked it on Sent from my SM-G975F using Tapatalk
  9. Many many many hours of 3 stage detail, wet sand, compound, polish, wax then sealant after hitting the wall at manfield plenty of battle scars but I think it turns out really well for not paint touch ups. Sent from my SM-G975F using Tapatalk
  10. Worked for me can you see it now? Sent from my SM-G975F using Tapatalk
  11. Haha tell me about it bro just yell on concrete and the way I fell somehow did it. Was sitting on the ground for 2 hours waiting for an ambulance haha Sent from my SM-G975F using Tapatalk
  12. Ordered these carbon backing plates to get rid of the hideous orange reflectors. But in my fashion not long after sticking these on I tripped over and broke my Femur and now my clutch leg is out of action for 6 - 8 weeks (crying on the inside) So car coming along but will be disconnecting the battery and putting a cover over it while my leg heals. Sent from my SM-G975F using Tapatalk
  13. Think you hit the nail on the head with the well maintained part. My V7 has 131,000kms on the body and is on its third motor that i know of
  14. o2 sensor? I had this issue recently. car was over fueling anything under 20% throttle due to fault with o2 would pop and bang with normal driving occasionally and would have rough idle and nearly stall.
  15. Pretty sure Macbuilt in Wellington build custom sumps also which I have heard good things about. Have you had a chat to Tony from Dtech? He has developed his WRX track car and would know a good way to go from experience.
  16. Probably a bit late to the party but i have a Fenix alloy one good value for money. haven't had an issue on Dyno or track days etc
  17. Picked my car up from Kaizen works who fixed two exhaust leaks and fitted my air oil separator. Tracked down a new spot light cover as mine decided to exit the bumper last time I drove the car so will be getting some paint matched on Saturday to spray the new one. Besides this just waiting for Tuesday to roll around so I can have the touch up tune done then enjoy the car
  18. Yeah the Tomei M8265 is great! however has been discontinued - I have a mate here in welly who has about 280kw on 98 and 320ish with e85. They have the smaller option available also which i am sure would be ok but you are rite the price is up there not much more for a EFR
  19. I was going to put cams in mine before the tune just recently and was told unless im shooting for high power 300kw + they are unnecessary and I would mainly be buying them for the idle noise haha. You could always go for a bigger turbo which would normally have a bit more lag however it would shift that power band up? Maybe even have a chat to Steve Murch, he quoted me around $700 to modify my VF30 to make more power he said it would be better than a TD05
  20. Had the bugeye tuned, made 269kw with stock location turbo pretty happy with the outcome. Sent from my SM-G975F using Tapatalk
  21. Interested to know this, In my mind wouldn't 1.3 be better as it wouldn't be stressing as much at the higher speeds? if it was around town only then the 660 would be better.
  22. Not this year Puke is that bit to far to head with the trailer - would be cool to see it at potentially Taupo next year to meet in the middle
  23. I dont mind it! i think its cool how you can see the exhaust, you could always make a diffuser? the ones that have the slits coming down. Or have a look on Zerooffset.com.au and see if they have anything to add on.
  24. The stance on this is on point 👌 wicked wagon bro
  25. I reckon $1 reserve on trademe mate people that need parts etc will look to bid on it and at least you know you can say whats wrong with it and make it as is where is. My worry with giving cars that need work to places like Turners is they have been known to patch up issues and sell for more. If you have a price in mind that you want, chucking a random figure here say $1000 just put it at that reserve so bidding starts from this point.