preim

Another revival with some pics from last year while i was hunting for forum bugs. Some updates since photo's taken as have a black plate now after seeing a mates one and couldn't resist as well as some ad08r's.

Looks like ST2810055270 godspeed

i usually order all servicing consumables from partsouq along with any other bits and pieces I need to consolidate shipping. Ends up cheaper shipped than anything locally and all oem kit.

I would also have no concerns recommending Dave at Tune Technic if you are closer to West Auckland.

Not sure about these ones in particular but if it were me and you want zero hassle I would buy headlights from a RHD market. I think typically the light patterns can be different as they are designed to light up signs on the side of road but not blind people coming the other way. Not sure if this is less of a concern on newer cars. If this has already been considered then keep on and don't mind me. 😂

I've dreamed about both forever

Haven't driven it much at all this year so these are a bit old but will throw them in the ring. Courtesy of friends more talented than me. Really need to get more rolling shots but its not particularly easy.

looks mint!

I don't keep up to date much on new cars anymore and was pretty confused coming into this thread like no s*** its important haha Drove a brand new camry in the states in 2017 which had the adaptive cruise control and lane assist and collision avoidance which sounds a lot like this subaru equivalent. Never got to test the collision avoidance thankfully but on the large highways the adaptive cruise control was pretty awesome. I found the lane steering assist a really odd sensation. It felt like when you have a big gust of wind push you to the side in a light car. I can see it being a very good way to avoid rear ending someone if you lose concentration in traffic or fall asleep on a long drive etc.

Brave

Don't give up on the jdm braapapap woosh dreams

If you want a reference my 96 Suzuki Alto, 660cc turbo, gets average 6.2L/100km and I am not light on the throttle and drive daily. Would probably get better if you drove it like a city car should be.. Tires are 155/65/13. Look after it well of course but most of my journey to work would be on the motorway. 5 speed box though so it's not too bad in terms of revving it's nuts off. Lots of fun, highly recommended.

2k at winger is probably $300 at a reasonable mechanic lol

What is fuel economy? 😭

I think we would all concur with this statement. If you want more performance start saving and buy another car one day. You won't really get any value for money out of this one. Enjoy the Subaru life with a decent fuel bill while you can!

Yep the wire or wires should be pretty clearly labelled.

I have always done installs myself but I can at least say the people at driving sound in Mt Eden have been friendly and said the right things when I have bought some stuff there. Chat to them and see if they seem onto it. Wouldn't go to sound around but that's my personal experience. Sound Tech NZ in new Lynn would be the budget option, super sketch, great price. I would take my own product there to get installed not use theirs. Rapid radio have a good reputation I think but are probably expensive as their work is marketed at high end. Never tried hot wire but they could be good option price depending? Or do it yourself! It's pretty easy once you get into just take your time, disconnect the battery first, and don't break any plastic 😁

You might already know but CANs a great design because the noise on each line induces an inverted signal in the other line effectively cancelling all noise. Inbetween the two ends you can splice on whatever is necessary. As long as you have the terminating resister between the lines at the end of each bus, 120ohms from memory, and match all the signal rates, endianness, and ids it should all go smoothly... What ecu are you running? Sorry if it's obvious on mobile atm and haven't read much. With a good ecu you shouldnt even have to worry about any of the low level stuff anyway, just type in the correct frame ID for the sensor on the line, set the correct transmission rate and go. A CAN sniffer off ebay/aliexpress wouldn't go amiss for troubleshooting at hardware level. You can make sure you're sending out the right frames this way. I've done a bit of work with can buses on arduinos, stm boards, and motec ecus so can field some basic questions if you have any particular ones but by no means an expert.

cleaned the alto and started a garage thread...

https://jdmfsm.info/Auto/Japan/Subaru/Impreza/ edit: I think you are after this one: https://jdmfsm.info/Auto/Japan/Subaru/Impreza/2013/2013 WRX & STI Owners Manual.pdf

heading to whitianga tomorrow, may see you down at one of the local bars..

or a large hat...

https://jdmfsm.info/Auto/Japan/Subaru/Impreza/

This has also been my theory with exhausts. I would always be wondering what it sounds like at its loudest, start with nothing and you can always add resonators/mufflers