Jump to content
Please check your junk folder for registration emails ×

McMatty

General Member
  • Posts

    393
  • Joined

  • Last visited

  • Days Won

    14

Everything posted by McMatty

  1. Costs more than the car 😂 the idea was for a complete cluster replacement. I think lights and all that can be wired in to work for the dash
  2. Hi all, Thinking about adding a digital dash to my ST BH. All the dashes I've found mainly require a can connection to work. I believe I have a link G3 V7 plug in ECU running the show and it has an empty 5 pin plug on the board which I believe can be used as the CAN port. Anyone able to confirm this? Also if anyone has any recommendations on a digital dash would be appreciated. Currently looking into a Powertune digital one
  3. Bought another one, think I'm on my 11th BH/BE
  4. Got my genuine Recaro seat rails assembled and the passenger seat in for a test fit. Seats are from a 2004 Accord euro R Sent from my SM-G991B using Tapatalk
  5. Do you know if all the seat mounting points are the same on the bottom of the seat? I've found a seat rail but doesn't say what model seat it fits Sent from my SM-G991B using Tapatalk
  6. Does anyone know where to get seat rails? Have recently bought some Recaro SP-JJ seats from a CL7 Euro R but can't seem to find rails as I'm wanting to put them in my BH Sent from my SM-G991B using Tapatalk
  7. If you've had the intercooler off I'd check for vacuum leaks, there are 4 vacuum hoses that go to the intercooler and they need to be put back in the correct places. Unless they have been replaced they should be numbered and easy to find their original places. I've had the maf unplugged off my rev d and it didn't stall so may be a good idea to get it checked or swap it out to be sure. Sometimes the easiest way to find the problem is to revert back to how it was before and see if the mod was what caused the issue Sent from my SM-G991B using Tapatalk
  8. Has the factory pink injectors, have talked to Tony in the last couple days and he said to send him a set of pinks and he will get then decapped and flow checked. So while that's happening I'll try get a cert Sent from my SM-G991B using Tapatalk
  9. Not today but a couple weeks ago I got it back from DTech. And after nearly everything breaking on the dyno it put out 199kw. More room for power with bigger injectors, any suggestions?http://cloud.tapatalk.com/s/631d9c6491716/20220812_145143.mp4 Sent from my SM-G991B using Tapatalk
  10. Got my brembos and 2 pot rear calipers back from powdercoat on friday, rebuilt the calipers over the weekend, fitted today with new pads and rotors. Finished off with STI Forester wheels. Fitted smoked sequential LED guard indicators. Now to raise the suspension so it's actually drivable. Sent from my SM-G991B using Tapatalk
  11. Any tips on doing a dual boot? Sent from my SM-G991B using Tapatalk
  12. Not that smart with computers sadly, however that does make sense. I'll have to look into it, thanks Sent from my SM-G991B using Tapatalk
  13. Have sent Mark a text but haven't had a response yet. Definitely do have the tune file you've sent me and borrowed a tactrix from a mate, couldn't get anything to work whether it's because I have a Mac book or I did something wrong I don't know. If you are able to help me out when you get your cable back it would be much appreciated. Sent from my SM-G991B using Tapatalk
  14. Don't suppose you have a way of getting in contact with him? Sent from my SM-G991B using Tapatalk
  15. Anyone know of anyone in the bay of plenty that can reflash an ECU? Have done a single turbo swap on my BH5D but now just needing a flash. Even have a tune that could go on but don't have a tactrix and can't figure it out [emoji28] Sent from my SM-G991B using Tapatalk
  16. Went to Autolink, my local panel beating supply shop Sent from my SM-G991B using Tapatalk
  17. Stripped my brembos and bought some color matched paint for the body. Going to send the brembos and 207 halves to go get cleaned up tomorrow before powdercoating the brembos and collecting bits for the 207 Sent from my SM-G991B using Tapatalk
  18. Legend! Thankyou Sent from my SM-G991B using Tapatalk
  19. Hi all, anyone know which hose goes where on a Mac 3 port boost controller? And does the restrictor pill need to stay in? All the info I'm finding online seems to contradict itself. Sent from my SM-G991B using Tapatalk
  20. Haven't done much to it for a while but just got it back from fab, now has a front mount intercooler. This one is quite different from all the other BH/BE's I've had, I've ST swapped it using a vf30, 6 speed swap from a BL, brembos going on one day, eifel prova adjustable suspension, genuine work wheels and a blitzen bumper. Paint to come one day but new engine first. Sent from my SM-G991B using Tapatalk
  21. A chance has come about to do a dash swap in my BH legacy with a V7 STI dash and was just wondering if anyone here has done it before? Anything that ill need? and wiring wise which parts do i have to merge and which parts will swap over? I know the basics of what ill need being, dash, cluster, hvac system, airbags, steering wheel and wiring. Main reason im wanting to do the swap is because i want to single turbo swap a Rev B wagon but want to use all the goodies like pink injectors and not have to mess with my motor again changing over the timing system and intake, plus id be able to use a V7 ecu meaning i can either tune it or get a plug in later down the line.
  22. Bought a new turbo for the B4 yesterday, a vf23, and bought some 18's for it today. After seeing them on the car, theyre too big but they were cheap so eh why not, they still look better than the 16's. If onky they cleared the 4 pots. Now I need spacers for the front. Sent from my SM-G980F using Tapatalk
  23. Is the car allowed to be multiple different colors? If so i can try find a good spot for the barely driven driveway warrior Sent from my SM-G980F using Tapatalk
  24. If only it was that simple. First payment was supposed to come in on Monday. No money, checked again today. still nothing. So i called the ministry of justice and asked what the next step was. Turns out that the attachment order was served on the 12th of June. On the 18th of June she filed for the benefit. So we can all see the problem there. So back to the court i went. I had to file yet another attachment order in order to get money from her benefit. But i didn't stop there, i don't really want to say what else i've done in case in case she is lurking on here, she is pretty into her cars so it wouldn't surprise me if she's on every forum. What i can say is that its totally legal because the court provides it as an option. As much as i have been told to drop it. Im not stepping away and id like to thank all of you for supporting me to do this. Oh and for those counting. The bill is now almost $4000
  25. Right, so a little update for those who care. I've finally filed an attachment order to be put onto her pay and its been approved. The business shes works for has been ordered to deduct $50 a week from her pay and send it to me. From my calculations thats 72 weeks if the payments are all made and on time which means I might have some spending money for Christmas next year. The attachment order states that its up to me to make sure payments are coming in so a few calls to her place of work might be made. And while $3580 might not be a whole hell of a lot to be fighting over for the time its taken and will continue to take. i think an example needs to be made so the next person doesn't get let off so easily. Sent from my SM-G980F using Tapatalk
×
×
  • Create New...