-
Posts
988 -
Joined
-
Last visited
-
Days Won
95
Content Type
Profiles
Forums
Events
Store
Posts posted by Technikhaus
-
-
I'm also getting a set of heads shipped down from Auckland to Dunedin, I'd say to see if they could be shipped together, but mine are going through a machine shop in Auckland first.
-
Would you be up for doing the work yourself? As DIY it's much much much cheaper than that, just can be quite tedious, and take quite a while.
-
You may be best to buy a cheap one or a shell.
There's one in Dunedin atm for $800. So less than the cost of a cert.
- 1
-
Yup, have bought a few sets of tyres from them, pretty good value.
Just remember they rack on $49 or so per tyre for install and disposal.
-
I'd say you'd still pass, it's something huge like 700g or something, which is super easy to pass. His MPS was tuned, and ran crazy rich, and flew through, nowhere near the limit, and he has no cats at all.
- 1
-
Not quite right either actually, you can still pass a WOF with no cat, as long as you pass an emissions test too, which is an extra cost.
A friend 'failed' a wof on no cats in his MPS, but elected to do an emissions test, and passed. So he just hands over a copy of the test with his WOF to pass now.
We were surprised he passed, but it's actually a very lax test, so even with an aftermarket turbo and everything massively modified, he still gets WOFs. -
Yeah I'd expect that to go crazy high!
-
37 minutes ago, 2Smoke said:
Cheers guys, all top info. Will check the turbo after work. Bonnet is def alloy so looks like that's the only sti bit haha.
Is indeed a 5 speed. Either way I'm happy. A complete wrx that seems to run ok for $675. Can't complain
Wow that's cheap!
- 1
-
12 minutes ago, Andy_Mac said:
Neither are performance mods really. The deletes just save space and future failure points
Yeah we had the pump fail on our last STI, so definitely removing on this one.
TGVs I've heard can help flow, but probably not so much at this power leve.
-
55 minutes ago, Andy_Mac said:
@Technikhaus Very interested to see what it can make.
Same actually.
We're going to do the air pump delete, and maybe a TGV delete beforehand, although not sure if the TGV delete is really necessary..
-
Sold my Falcon yesterday, quite excited about that! Bought it almost 2 years ago for $6990, sold yesterday for $6500, not bad...
And the STI has a new down-pipe from PBMS sitting beside it, and awaiting arrival of a new fuel pump, and ProcessWest intake, then just need to organise a tune and get it all installed.
- 2
-
Hey all,
looking to order the timing gear from partsouq, it lists the timing belt as 'US Spec'.
Does anyone know the part number for one for a 20G?This is the part number listed in paratsouq 13160AA060
-
Haven't found any so far! Still going through all my old stuff though.
-
Especially BC Legacy's.
I wanted a BC road car to replace my BC rally car, but the prices are so ridiculous now.. hence ending up with the GF8.I shouldn't have sold my RA, that thing is an easy 10K plus now..
- 4
-
1 minute ago, BLSTIC said:
That would be fantastic.
Also, possumlink be awesome if you've got one you don't need. Even if I can't pony up for it my flatmate (who needs the second set of piping) probably will, along with any performance parts you might want to part with. We both want to eventually have 250whp if that helps anything
I'll take a look, I did have a possum link at one point, but might've gotten rid of it already.
Will try remember to have a look on Sunday and let you know!
-
If I remember on Sunday I'll take a look in my spares.
Up until a month or so ago I ran a BC Legacy rally car, and no have a v2 WRX, so I have a bunch of misc parts between them, I'll try compare biuts and see if I've actually got any intake setups... -
Finally got a couple of mates around to the workshop last night and fixed the hoist.
Which meant I could finally look under the WRX, and man has this car been neglected.
It looks as if nothing's ever been touched under here before.
I grabbed the tie rods and was able to twist them side to side with just two fingers, so I'm glad I ordered new ones and new ball joints.This will all look totally different once I replace it with all the new bushings and cleaned/paints arms etc.
Rear LSD felt alright, but the centre diff seems extremely weak, If I spun the fronts, the rears wouldn't spin, not surprising since that's optn.
When I spun a rear, the other would spin, but not even one front would. My spare box/diff wasn't like this, and you'd spin one rear and both rear plus one front would spin.So may swap it over to my spare setup out of the rally car.
Excuse the messy workshop, it's slowly getting tidied up as I get rid of old parts.
-
4 hours ago, Greaver said:
Well f*** that might not be the go then, don't want it setting off the alarm on my 33 when I start it in the garage lol
I didn't realise the pitch stop increased NVH so much, did it make much difference to the feel of the car?
Whats everyone's opinion on downpipe, decatting the standard one worth it or just go for PBMS twin scroll one at $599?
We've ordered the PBMS one, awaiting delivery for it now, but won't be getting installed until we go for a tune. -
Hit a 'milestone' in the daily today:
- 3
-
haha it does!
Just trying to work out how best to record it! -
7 minutes ago, Greaver said:
To be honest I really like the sound of the Tomei Xpreme but from I've seen they are f***ing loud which I don't mind however I'm living right on top of as few neighbors currently which could make that an issue warming her up at 7am haha
My neighbours already tolerate my smokers but I don't wanna push it too far while renting
@Technikhaus If you get a chance I'd love to hear more of the R400 mate even if its just a quick in cabin video because what you posted above sounds nice and finding ELH EJ20 footage on youtube for most of these exhausts is super annoying
No worries, I'll see what I can sort, checked my videos but sadly I don't think I can find any more, so will try record some
- 1
-
1 minute ago, Greaver said:
Heaps of great advice above thanks for the input, the intake especially makes a lot of sense from a $$$ point of view even if I love induction noises.
So do you guys think I will be safe to chuck a cat back such as the R400 or Xpreme on there straight away if I'm not touching anything else without needing to tune immediately?
If that is possible I would consider going that way while I get whatever other basic bits I want together such as downpipe, fuel pump and three port solenoid then I can get everything installed and tuned at the same time in a couple of months when life is less hectic with Level 2 coming in.
That's exactly what we did, R400, and no other mods, it's running happily, and has been for over a year.
-
Here we go, here's just after we installed the R400:
- 1
-
1 minute ago, Andy_Mac said:
@Technikhaus how are you liking the r400?
It was literally the easiest exhaust ever to install, think it took 10 minutes? haha.
it's a little loud, but not too bad, although I think once the cat-less down pipe goes on, we'll probably need to put a resonator in.
Looks great, sounds great, and hasn't been any issue!
I'll see if I can find a video I took...
-
Who's Online 0 Members, 1 Anonymous, 102 Guests (See full list)
- There are no registered users currently online
Latest Purhcase - SH5 Forester
in General Vehicle Discussion
Posted
Looks super nice, always loved that shape!
Although I never noticed until your pictures, how much it looks like an outlander from the side haha.
It's definitely a model I'd look at if I was wanting something a bit more 'suv' like.