Jump to content
Please check your junk folder for registration emails ×

neodowd

General Member
  • Posts

    166
  • Joined

  • Last visited

Everything posted by neodowd

  1. Hi does anybody in christchurch know how to install an electrical boost gauge, and would be willing to do a cashy? Thanks
  2. I think if it was the release bearing the noise would go away when you press in the clutch if I remember right.
  3. I would highly recommend Dan. He just fitted a boost gauge for me and did a very good job at a good price. Cheers mate your a champion!
  4. Andy_mac yes it is a jap import, looks like it's a twin scroll cheers
  5. Are the vf45 single or twin scroll ? I have a facelift gtb spec manual 2006 and was under the impression it was single scroll but other info I have read tells me it is twin scroll . cheers
  6. neodowd

    Issues

    Yea mine was the same, had no cel codes. I replaced afm and it drove like new again.
  7. Hi Guys I have a 2002 forester xt automatic and I was wondering if there are any members who could do an ecu reflash/tune that live in christchurch. I was basically wanting to get better fuel economy and better response nothing to extreme. Thanks Neil
  8. ^^+1 bead of silicone sealant along top of garnish stops water getting into tail light.
  9. You can put candle wax on belts to stop them squeaking only works on belts that are not slipping
  10. Is it happening at wot? if not it might be 02 sensor.
  11. Rattle noise from turbo could be loose heatshield
  12. Try cleaning your maf sensor, surging and a rough idle can be caused by a faulty maf
  13. I have my factory airbox getting air feed from inner guard with delete of resonator. I found though when I completely blocked off inner fender from engine bay it was not getting enough air and would run super rich at wot. I unblocked the hole were the pipe goes from headlight to fender and it runs fine.
  14. http://www.subaruforester.org/vbulletin/f87/my03-walbro-fuel-pump-installation-38407/#post438315 This might help, I didn\'t read it so I can\'t be sure
  15. You could try paint doctor from repco it spose to remove oxidation and other paint blemishes. I have tried it not for oxidation and its awesome.
  16. Yea newer models have an engine symbol instead.
  17. Just looking on google and it seems most people leave it in drive with automatics. I\'m now going to change my driving habits and leave it in drive
  18. Putting a neutral on a gearbox purely for the purpose of being towed?? wow
  19. What don\'t you understand about what I said? Mike\'s not too good with written or spoken language... so I will explain. I believe he was expressing some mystification at your statement about changing from N to D while completely stationary being smoother with your foot on the brake. Why put it into N?? Thats why you have a stall converter. If you wanna play with gears get a manual. If not , leave it to do it\'s job... Well why do automatics even have neutral then oh wise one?
  20. Don\'t take it personally B-Magic their only giving you a bit of stick. Sometimes I\'m scared to post on here in case I get jumped on like you have lol
  21. Thought this might be helpful to someone. I have a forester xt and have always thought the heater was pretty crap all noise and not much action. My older forester has a good heater so I thought newer ones were just crap. well I was trawling the net and found a thread about changing your cabin air filter (I didn\'t even realise they had one lol) Well low an behold I pulled my one out and it was filthy, got new one priced at repco $70!!! bugger that so I cleaned mine and now heater works mean as. Link is for a wrx but you get the idea
  • Who's Online   0 Members, 1 Anonymous, 66 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...