Jump to content
Please check your junk folder for registration emails ×

Trent

Auckland Member
  • Posts

    762
  • Joined

Everything posted by Trent

  1. Need to know who can cut my throttle body flange off the manifold and welded it 30mm lower and level on the same side
  2. Wow out of the 8 different gcs ive owned none of them ahave had that brace as shown above ???
  3. Definitely +1 on the swaybar i got 27mm rear and 24mm front both whiteline honestly never driven a car with handling like it. It isnt a daily so i wud advise against goin that big maybe 24mm rear and 22 front .
  4. I loved my bcs in my old coupe for the road they were set just harder than half adjustment and were the only coulovers that wouldnt sag with a full car 6 people in a type r hehe
  5. Anyone able to dumb it down for me . The car worked fine and so did the antilag but i noticed the check light once i was cruising back home
  6. Hi im going to do this conversion in my 96 sti just wondering would a g4 atom be up for the job. And did you consider just making a adapter for the ej20 throttlebody or is it too small? Could you also post up a pick of your fuel return setup plz plz ;D
  7. So funky are you saying that the factory modine shud be removed the car is to be raced?
  8. Who stocks all the hardrace stuff
  9. It works!! And its got 1 of those gfb short shifters . Accedentally down shifted to 2nd instead of 4th revved its fricken tits off hopefully engines algood
  10. Oh so i have to use the 5speed starter when i use 5speed clutch .just grind away a bit of the starter to get it to fit?
  11. Is the data logging your talking about with toyr moroso sump or are you talking about the forementioned pbms
  12. Yea i will do that funky just gotta get someone with a helicoil or tap to come round .. rex leggy do you not tap it and put one in like funky??
  13. Ok so ive come across another problem the bottom starter motor bolt hole doesnt line up with any holes on the block and theres no thread in it for a stud??
  14. Yea man 1 of which wasnt even holding the car just me and a mate but he.s not mechanicly minded at all just good company haha was definitely bit scary at times haha
  15. Cheers guys i ended up pulling the box back to the end of the studs and swaping the forks.. my mate wanted to cut down the slave push rod but i thort i should do it properly . Best to use 6 speed starter? Anyone else struggle to get the 6speed on the engine and in the tunnel. Not much room ae haha!
  16. I just put a 6speed in my gc8 using 5speed ckutch flywheel and clutch fork but now the slave wont bolt on if i put the slave rod all the way into the slave it may just bolt on but that means it will basiclly be trying to lift the clutch off the flywheel all tge time?
  17. So which 1 shud i get tomorrow haha
  18. Pretty sure open front diff and i wudnt have a clue its all out of a 02 sti
  19. Ok new to 6speeds im.putting 1 in on the weekend what fluid shud i be running in diff and gbox apprently my new gearbox is dccd . Car is a.track car.mainly but is road legal-ish. Also who sells uprated shifter bushes for 6speeds cheers trent
  • Who's Online   0 Members, 0 Anonymous, 80 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...