Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

DCCD guru's please help


Markmcrs

Recommended Posts

Hi all,

In desperate need of some assistance from any DCCD experts.

In brief;

I have a V4 STi

I have amassed all the parts to retro fit DCCD, such as cluster, thumb wheel, ECU etc.

Basically I have a complete, virtually unmolested loom, which has made everything easy except for 2 lots of unidentified wiring.

I don't know what model the loom is from unfortunately, but I'm 99% sure it's GC8.

So, thumbwheel, ECU, cluster, gearbox and relay are all plugged in.

There is 2 earth straps and they have been earthed to the car.

First problem; there is a Male/female plug that is currently joined together - they are located about 40cm down the loom from the green plug that slots into the cluster.

It is a large white plug with black ends where the wires go in.

It's like they intercept some other plugs? Could this have something to do with the brake pedal?

The other set of wires - there are 2 together, are about 80cm from the thumbwheel.

I'm thinking that these are for a power source and or possibly to do with the park brake switch.

Any help greatly appreciated - I have done a fair bit of searching/reading on this forum already on this topic, but most of the info seems to be related to V5/6

Link to comment
Share on other sites

ok i went though this with ADR the other night took me about 4 hours to figue out what go where.

basicly the v5/6 unit is the same s 3/4 apart from the wiring that goto the ddcd lights at the speedo.

i will ask my adrian to bring in his loom that i labeled for him what wire is for what and where they goto... its pretty basic really...

there is funkytown who has just did his wagon putting in a ver9 dccd box wired up to a ver 3 sti wagon.

if no one reply you by tonight then i'll see what i can do. i just got home and havent any sleep for almost 20 hours

i got a full loom also which im going to start labeling the plugs and will do a write up for everyone soon unless funkytown beats me to it?

there is a wire that goto the hand brakes that i can remember

most of the power source goto the relay ( pink plug )

Link to comment
Share on other sites

Thanks guys.

I'm in South Australia :o

I haven't 'swapped' looms as such - I picked up a complete DCCD loom and cluster and have fed it through the car to the applicable spots.

It's the 2 plugs that currently clip into one another that have me stumped the most.

What if we look at it from a different angle, what are all the relevant plugs of the DCCD loom connected to...

1) Thumbwheel

2) ECU

3) Relay

4) Gearbox

5) Cluster

These I have all sorted, so what else is part of the DCCD?

6) Park brake wire?

7) Power source?

8 ) ? ? ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...