Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

6 speed conversion


Recommended Posts

  • Admin

v3 = mechanical sender?

Pull the speedo sender off your old gearbox and put it in the new one. Should fit straight in.

5mt clutch will work, I believe, but you should really use a 6mt one.

You match the starter to the flywheel, which you match to the clutch. Again, I would use all 6mt items.

Clutch slave and master cylinder, nfi, someone else will need to weigh in there.

Link to comment
Share on other sites

you DO need the 6mt clutch fork!!! that\'s critical as the 5mt one is the wrong shape and is required whether you go 5 or 6mt clutch.

your front axles will go straight on, but beware that v9 spec c onwards comes with female stubs on the box so you have to convert it to male then your front axles work, kits available or you can get stubs from an auto box i believe.

rear axles depends on what rear diff you use to be honest. straight up a normal r180 6mt rear diff wont work with your factory v3 axles. if you go for the 3.9 r160 rear diff (one for sale on here) and quite hard to get a hold of then your v3 axles are mint. IF you go the v7 diff way, you need to convert your axles / rear hubs / brakes etc all over to r180 as well.

clutch / flywheel / starter / clutch slave all as mentioned above.

Link to comment
Share on other sites

you can always go to a shop in the states called DSS (driveshaft shop) they sell specific axels for r180 rated to stupid horsepower but is not exactly a cheap option.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...