Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Oil in Water


rawyatt

Recommended Posts

Hey guys, i have a 1996 gf8, manual and am getting oil in my water reservoir. It started a couple months ago and got to the point were it was getting quite a bit of oil gunk in the overflow tank and reservoir. So first thought was headgasket. Got into it and got them done about two weeks ago. Now the annoying part is, im still getting oil in my water. Could it be just the last of it coming out?(i did give the radiator and engine a good clean while it was out) Or could it be the turbo? Oil cooler? Any suggestions will be helpful:)

Link to comment
Share on other sites

Ok thats good to know. With the block, i used a toothbrush to get everywhere i could, and degreaser. With most of the pipes, i used just a rag to wipe off what i could get at, and with the radiator, was a bit difficult, so i just flushed it with water for about 10mins

Link to comment
Share on other sites

I diagnosed it as a headgasket as it was pushing oil firstly into the overflow bottle, then slowly more and more into the reservoir. Also when I left the car sitting for a couple days, on start up it would throw a big puff of white smoke. Couple weeks before, the car did get 3/4 hot on the temp gauge as a water hose came off. So I pulled the motor, got the heads skimmed and crack tested, gave the block surface a clean up. And put back together myself. No other symptoms, no smoke, no overheating, just oil sludge showing up in the reservoir.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...