Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Upper cylinder cleaner worries.


Nick89

Recommended Posts

Hey all. Im about to do a service on my 1998 subaru impreza, non turbo two litre. I figured I'd run some of that upper cylinder cleaner through it, since I havent done it in the 20,000 or so kays ive had it, and i doubt the previous owners did either. The service department guy at Subaru warned me that it could damage some of the seals within the engine if it hasn't been done before. Car has done 158,000 kays. Im sure he's just being cautious, and I can't see it buggering anything, but I'd hate to do it and then....I dunno....wreck a valve steam seal or anything.

Soooo......go for it? Or leave it alone? As I said, he's probably legally obliged to warn me of it, but he said it is part of subarus service plan and should be done every 10,000 kay service anyhow. So yeah, advice?

Link to comment
Share on other sites

I did it on my car with no issues (don't know if it was ever done before I got it, but have done it twice with no issues that I know of), I don't know why he would say that it would damage seals if they use it. As you said it may be a*** covering if something did go wrong. Personally I would do it, car seem to run better after it.

Link to comment
Share on other sites

Just ran some through. Not a lick of difference! And no smoke whatsoever either! Was a bit disappointing actually haha. And yes, I did spray it in the right place. I guess since my car sees almost entirely motorway running, there isn't much of a chance for carbon and other gunk to build up like in city driving.

Link to comment
Share on other sites

 Nick89 said:
Just ran some through. Not a lick of difference! And no smoke whatsoever either! Was a bit disappointing actually haha. And yes, I did spray it in the right place. I guess since my car sees almost entirely motorway running, there isn't much of a chance for carbon and other gunk to build up like in city driving.

if your mostly nice hot motorway driving you wont build up carbon..

Link to comment
Share on other sites

  • Admin
 PUREBROWN said:
Yes most definately and it doesnt hurt to through some injector cleaner in your tank at the same time

wtf

EDIT: Maybe if you're getting your 89 octane fuel from the tank behind the shearing shed that last got topped off in 2004

Edited by boon
Link to comment
Share on other sites

Yeah I ran some injector cleaner through it a few months back before a long trip. I did an oil change the same time I did the upper cylinder cleaner. I know it shouldn't matter, but it just felt good to give it a wicked service! Upper cylinder cleaner, oil change and filter, new plugs, and with my recently rebuilt front calipers...its like a new car. Still slow though......

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...