Eg33 turbo builds ?

[Joker]

why cant you? on pc or phone? there are a few methods

[lachlan]

Photo bucket is pretty easy . Failing that jus use face book lol . What did you do for cams ?

[Joker]

imgur or even instagram (copy the share link & paste here)

[boon]

 fbssub1 said:

wish I could post the pics of my twin turboed eg33, custom cams,8.5:1 pistons, I beam rods, ported & polished heads,custom headers running Garret t28 turbos tial 38mm waste gates, 850cc side feeds

Is that the one from down chch way that was going to go in a Porsche replica until the guy ran out of money?

[Guest]

 boon said:

Is that the one from down chch way that was going to go in a Porsche replica until the guy ran out of money?

Yep.

[lachlan]

still tinking about this quite a bit .

will stock pistons with the dome machined off them . stock rods . mls gaskets .and reground cams make 400hp / 300 kw ? at up to 14psi ?

some people rekon the rods and or the pistons wont do that . but other people rekon they plus t them to beyond that power level .

plan on using 6 x yellow side feeds .

can you put solid lifters from anything in the heads ? i read they were similar to v1/2 hla setup ?

[Kiwi_Fozze]

I do believe the eg33's have a huge issue with keeping the heat down....

[lachlan]

im well aware of that . can solve that problem on my own

[Guest]

 lachlan said:

still tinking about this quite a bit .

will stock pistons with the dome machined off them . stock rods . mls gaskets .and reground cams make 400hp / 300 kw ? at up to 14psi ?

some people rekon the rods and or the pistons wont do that . but other people rekon they plus t them to beyond that power level .

plan on using 6 x yellow side feeds .

can you put solid lifters from anything in the heads ? i read they were similar to v1/2 hla setup ?

Hx50 with a decent housing should help keep bits in the block. Keep runners short and small in diameter. 4in exhaust.

[lachlan]

Yea exhaust back pressure will be well under controll

[R/T]

On 7/12/2015 at 8:47 PM, fbssub1 said:

wish I could post the pics of my twin turboed eg33, custom cams,8.5:1 pistons, I beam rods, ported & polished heads,custom headers running Garret t28 turbos tial 38mm waste gates, 850cc side feeds

I'd love to see those pics fbssub1

[R/T]

.

Edited July 12, 2020 by R/T