Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

A little help


duncanrp

Recommended Posts

Hey,

I am installing an aftermarket inlet pipe on my 03 EJ20 BP5 Wagon and I am hooking up the vaccum lines and I can't remember where a few of them go... (took it apart 1 month ago and didn't take pictures or anything).

1348795dde.jpg

The hoses circled are the hoses in which I don't know where to connect them. Can anyone give me some info?

Cheers.

Link to comment
Share on other sites

  • Admin

You end up cutting the front breather shorter like I had to with the same inlet?

Where exactly are we looking? Is that the inlet on the right? Shouldn't have been messing with any of those pieces right there if so

If you haven't already you'll want to get the bolts out of these two so they have the needed movement. They're at the back of the manifold

Breather crossover

1B8195D4-5C00-4741-93F2-803D345F72D5_zps

BOV crossover

752E23DB-8F8F-46BB-A0EA-DF41B9C155BB_zps

Edited by Andy_Mac
Link to comment
Share on other sites

  • Admin

Also I ran some gates hydraulic hose rather than the one it shipped with since oil turns heater hose to **** after a while.

Have you only got 2 hoses you're not sure where to attach or more? If its just 2 then are they not the ones that attach to the new inlet.

Link to comment
Share on other sites

  • Admin

Based on the shape of that one I would have thought it was supposed to go on the breather crossover right next to it but it looks like tou've already got something in there.

Its not the new hose you've got in the end there?

Actually had a closer look, since your turbo's out are you sure you aren't crossing over any coolant and breather lines?

Edited by Andy_Mac
Link to comment
Share on other sites

I'm thinking I may have connected the big inlet pipe port to the wrong place?? Maybe. As for coolant line crossover I'm not quite sure. the coolant feed line is still attached to the turbo.

this might make things more clear.

[video=youtube;LsRlVOoN26I]

Link to comment
Share on other sites

  • Admin

That first one seems right. Routed my differently to that though. Only way I could get it to fit nicely and keep the engine cover was looped around like that.

9862A81B-7548-4E52-9F32-8BC1A854FF87_zps

I had my other breather line attached to the T section of the hard breather and to the inlet halfway down.

Link to comment
Share on other sites

  • Admin

Just remember the engine cover seals the diverter on the underside of the scoop to the intercooler, without it there will be a gap. How much difference it'll make I don't know, but the airs gonna take the easier path so that may mean a fair share goes out the gap

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...