Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Secondary air pump codes


Recommended Posts

Hi guys. New here. I recently bought an 07 legacy bp5. 

I've done a quick search on these forums for the common dreaded secondary air pump valve failures. 

I have also searched online for all the info I can stuff into my brain. 

Im wanting to go down the delete route and remove the cel fault codes relating to this common fault from the ecu.

I am wondering if there is anybody in the Bop area that is able to remove these codes from the ecu and reflash it for me?

also while doing this can the upper cruise control speed limit be removed/changed?? 

with new highways expected to be changing to 110kms this year and the cruise control max 108km this is going to get annoying. 

Link to comment
Share on other sites

In rotorua but travel round the bay quiet a lot so having to go somewhere not an issue. 

I'll have a look for yours tonight :) 

im good with doing the blank plates etc just nervous bout flashing the ecu. 

 

The cruise control limit seems quite common as my wife's old v11 sti had the same thing couldn't set higher than 108km. Maybe I'm unlucky? 

Edited by Munta
Link to comment
Share on other sites

  • Admin

 

7 hours ago, Munta said:

In rotorua but travel round the bay quiet a lot so having to go somewhere not an issue. 

I'll have a look for yours tonight :) 

im good with doing the blank plates etc just nervous bout flashing the ecu. 

 

The cruise control limit seems quite common as my wife's old v11 sti had the same thing couldn't set higher than 108km. Maybe I'm unlucky? 

 

Just don't forget to keep the atmo sensor. 

Can flash a ROM with those codes removed for you no problem.

Link to comment
Share on other sites

2 hours ago, Andy_Mac said:

 

 

Just don't forget to keep the atmo sensor. 

Can flash a ROM with those codes removed for you no problem.

 

That would be awesome if you could. Where abouts are you, when would you be able to do this. Tired of the cel on. 

 

Im going to do it the lazy way as I don't have much time these days and leave most of the stuff in there just going to but a blank in between the valves and pipework. 

 

3 hours ago, ADIKT said:

Nz new cars or jdm? 

Both jdm. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...