Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

HELP NEEDED: GG9 Trans Conversion


Recommended Posts

I am trying to wire up the speed sensor and ground the ECU pin on my 2000 GG9 Impreza (EJ204). I can't find a wiring diagram that tells me which pin I need to ground to get the ECU into manual mode. I also need to wire up the speed sensor from the new trans which is a 2001 WRX box with the 3 pin connector. Can anyone provide the info I need? Cheers

Link to comment
Share on other sites

There is a link in this thread to one for a v7 sti, it may be similar but there is likely a lot of differences so take it with a grain of salt.

 

Edit: I had a look through it, it appears there is a wiring diagram for the inhibitor switch operation in there so it should be able to help you solve your problem. As always try to verify that this information is identical with what is on your car before you start grounding random wires.

Edited by IZichard
Link to comment
Share on other sites

Hey mate, look at page WI-68 (wrx) or WI-79(n/a) of the service manual I PM'd you the other day. that gives you the pinout of the speed sensor and how to connect it to the cluster. WI-69 shows the pinout and connections of the inhibitor switch and starter interlock. 

I've historically left the auto ecu in and just jumped the TCU to park at the trans end of the connectors, not sure how well it works in the newer cars.

Link to comment
Share on other sites

1 hour ago, mitch8198 said:

Hey mate, look at page WI-68 (wrx) or WI-79(n/a) of the service manual I PM'd you the other day. that gives you the pinout of the speed sensor and how to connect it to the cluster. WI-69 shows the pinout and connections of the inhibitor switch and starter interlock. 

I've historically left the auto ecu in and just jumped the TCU to park at the trans end of the connectors, not sure how well it works in the newer cars.

Forgot to update but I got the speed sensor done. Still gotta do the ecu but I haven’t got around to it yet :)

  • Like 1
Link to comment
Share on other sites

  • 2 years later...
  • 7 months later...

 

On 21/04/2021 at 5:54 PM, ej20sti said:

Hey there I've just done a manual conversion on a gg9 èj204. I need to wire up the speedo any pinouts available for the ecu i can do this. Please. Any help would be appreciated. 

Hey dude heres the TCU plug you need to tap into for the speed signal. If it's a 3 wire speed sensor one wire is power, one is negative and one is signal.

Never saw your comment as I haven't used this site in a while. Just bought my Impreza back which I had manual converted after selling it in 2019. Still never found which wire one the ECU was the manual ID nor have I found a reliable pinout. Could probably get it retuned by a tuner so it just runs a manual map instead and it'll be sweet. Highly recommend Custom Culture and Tuning who did the same to my Legacy Spec.B when I converted that to 6 speed manual in July. Cheers!

 

vss.jpg

Edited by SuperS0nic
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...