Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

4th gen blow off valves?


iludez

Recommended Posts

There’s heaps out there that fit. Height is typically the only limiting factor if you have the stock engine cover. Need to notch it out for taller ones.
I can't seem to find anything online or trademe. After something cheapish. Not super cheap but not gfb expensive either
Link to comment
Share on other sites

  • 4 weeks later...
This guy does various parts for our cars. Used to sell them on liberty.asn.au but that forum is pretty dried up these days. I've got his silicone turbo inlet in mine. Previously had his BPV too but sold that when I went to the fromtmount.
 
https://www.m.ebay.com.au/sch/i.html?sid=moddingyourcar&isRefine=true&_pgn=1
Andy you'd know the answer to this. How come on gen 4s the bpv is silent? Both my bp5 and bl5 are quiet haven't heard them at all, whereas on the be/bh you could always hear them.
Link to comment
Share on other sites

  • Admin
On 1/1/2019 at 1:37 PM, iludez said:
On 12/4/2018 at 9:02 PM, Andy_Mac said:
This guy does various parts for our cars. Used to sell them on liberty.asn.au but that forum is pretty dried up these days. I've got his silicone turbo inlet in mine. Previously had his BPV too but sold that when I went to the fromtmount.
 
https://www.m.ebay.com.au/sch/i.html?sid=moddingyourcar&isRefine=true&_pgn=1

Andy you'd know the answer to this. How come on gen 4s the bpv is silent? Both my bp5 and bl5 are quiet haven't heard them at all, whereas on the be/bh you could always hear them.

 

Not sure. Been years since i’ve played with a stock one. Mine was always super silent. The Kobe one I had was considerably louder even plumbed back. 

It's a longer path back to the intake on a BL/BP and imagine they’re setup to release as little air as possible to help get back on boost faster so willing to bet by the time it makes it back to the intake with all the twists and turns its barely a puff. 

Link to comment
Share on other sites

On 1/1/2019 at 4:01 PM, iludez said:
On 1/1/2019 at 3:47 PM, GorGasmSpecB said:
Take the snorkel out and you will hear the factory blow off valve a bit.

Yep done that already still can't hear it.

Yip, my BP is also dead silent...but want to get it a bit more noticeable.

 

Let me start with this snorkel...where does it sit and how does one remove it? 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...