Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

6 speed swap


Recommended Posts

Flywheel, Clutch plate/disc, I'd imagine clutch fork and pin, throw out bearing, slave and master cylinders (might not be needed, but good to do anyway), and I'm not sure about the starter? Someone here will be able to confirm that. Tail shaft, rear diff, rear half shafts, front half shafts, cross member(s) for the trans.

Definitely will need the shifter linkage too. I used to own a S401, and that had the shifter linkage from a V7 WRX STI in it - so that's probably the way to go. I'd highly advise getting the Raceseng R-Lock reverse lockout to replace the factory plastic one while you're there too - won't rattle, and a much nicer piece being alloy! And also new shifter bushings too - preferably Delrin POM-C ones in my opinion.

 

Some of this stuff you may not need, due to Subaru's having heaps of interchangeable parts - why they're great!

But as stated about, multiple threads about this conversion.

Probably the best way to get a 6 speed box is to see if you can get first dibs on a BL/BP Legacy with the EZ30 and a 6 speed in a wreckers - especially a Pick-A-Part, as they charge a flat fee for a transmission.

Edited by Individualities
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...