Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Bleeding I/c waterspray


Recommended Posts

Hey there I wondered if there was any tips on feeling the intercooler waterspray system.

 

I have had the tank etc out of my car and now plugged it all back in. The waterspray motor is going but there is no water getting to the nozzles.

 

Anyone had this happen before?

 

Cheers

Link to comment
Share on other sites

46 minutes ago, ginganinja said:

Hey there I wondered if there was any tips on feeling the intercooler waterspray system.

 

I have had the tank etc out of my car and now plugged it all back in. The waterspray motor is going but there is no water getting to the nozzles.

 

Anyone had this happen before?

 

Cheers

 

Check that the hoses are connected and there is water in the tank.

 

Link to comment
Share on other sites

  • Admin

Pull lines off at the tank then operate to see if it is coming out at that end. If that works then try at the next join in the lines and progressively move forward.

 Chances are there is a blockage somewhere if the pump is indeed pumping but nothing is making it to the nozzles.

Link to comment
Share on other sites

5 hours ago, Loren said:

 

Check that the hoses are connected and there is water in the tank.

 

Funny guy

3 hours ago, boon said:

Something bizarre going on here. The pump is at the bottom of the tank, not like it needs bleeding or anything. Maybe just run it for a while.

That's what I thought. Have run it a few times. But nothing getting to the sprayers.

 

1 hour ago, Andy_Mac said:

Pull lines off at the tank then operate to see if it is coming out at that end. If that works then try at the next join in the lines and progressively move forward.

 Chances are there is a blockage somewhere if the pump is indeed pumping but nothing is making it to the nozzles.

Yep I pulled the hose off at the bottom of the tank at the pump and water was pouring out, without the pump going. Will check theres no blockages further up the lines.

3 hours ago, boon said:

 

 

 

1 hour ago, Andy_Mac said:

 

 

Edited by ginganinja
Link to comment
Share on other sites

  • Admin
18 minutes ago, ginganinja said:

Could try that however Water does just pour out of the tank as soon as I take the hose off.

 

Add a but of extra hose to raise the height if you have any. It pouring out doesn't mean the pump is actually flowing anything

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...