Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Braided brake lines for V7 brembos into V3 type r


Recommended Posts

Hey team wanting to confirm before ordering, what are the appropriate brake lines to get for a brembo conversion into a V3 type r? My searching apparently says run V7 lines but I'm unsure if a) that's correct and b) if they will screw into the V3 hardline?

 

Will also be going through the `fun` of trying to find adaptors for the rear cos I have single pots. Any NZ recommendations that pass cert or is it better ordering from Torque solutions or the like?

Link to comment
Share on other sites

25 minutes ago, RaKid said:

I ordered gc8 braided line set when putting brembos in my gc8 and they worked perfectly fine.

Mint I'll hit up Racetech when they open on Tuesday for some GC ones then

 

2 minutes ago, blitzd808 said:

An option for the rears would be to try to get the r160 nz new wrx hubs that came with 2 pots. DBA then do a rear disc that suits the brembo rears without doing anything dodgy to the handbrake.

I believe (although this is by searching so who knows....) that with the weird v3 hubs (r180 single pots), all I would need would be 

1. Dogbone adaptor to fit calipers

2. Some DBA brake discs (supposedly DBA 2657 is the one that works with the handbrake) or some larger shoes to use the bigger rotors. Unsure which is cheaper atm lol as apparently both work?

Link to comment
Share on other sites

Ah, i mightve misread your initial post. I actually have a set of v5 rear hubs that fit the 2 pot rear caliper - i tried to fit them  to my BC but they wouldnt fit the rear end so im guessing they are r180 ones. That might sort out your dogbone adapter issue if you want to move away from that. 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...