Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Oil pressure sender for Lamco Gauges


ginganinja

Recommended Posts

Hey guys,

 

Just want to confirm what oil pressure senders work with the Old skool factory lamco gauge set and wiring? 

 

From  memory there was a thread somewhere online saying Defi ones work. Is this correct? Are there other options that would work also?

 

I think my sender has gone bad as it reads 2 bar of oil pressure with only the ignition on and then goes to maximum when engine starts. Or could this be bad wire connection??

 

Be glad for feedback

Link to comment
Share on other sites

I dont recall seeing a black box as such but it does have the extra wire to plug into the factory wiring so that the light doesn't show on the dash. Does the black box mount up behind the gauges inside the pod?

 

It has been working fine for the last 6 months it has been in the car. I had been driving it Saturday morning and everything was fine. Went to go out in the afternoon and pressure gauge was totally up the whack. 

 

I un plugged it and plugged it back in and started the car again and the gauge was read fine again that one time. Now its continually reading bad. 

 

Edited by ginganinja
Link to comment
Share on other sites

Yeah the box is mounted on the bracket behind the gauges. Just take the two screws off the front and the cover lifts off.
 

Mine was intermittently flicking the oil light on and off so not quite the same symptom but it is something to check before getting a new sensor.

Link to comment
Share on other sites

1 hour ago, IZichard said:

Yeah the box is mounted on the bracket behind the gauges. Just take the two screws off the front and the cover lifts off.
 

Mine was intermittently flicking the oil light on and off so not quite the same symptom but it is something to check before getting a new sensor.

Yep I got in there tonight and checked all the connections with the ignition on. Must have been a bad connection on one of the power wires as when I gave it a wriggle and it came good again.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...