Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

BE5 rev D only showing 0.5 bar boost


boostjunkie69

Recommended Posts

im only reaching 0.5 bar boost throught the rev range a bit of a valley in between primary to secondary i tried checking vac lines but it had a sbc connected to secondary turbo so i used a vac line description from here to return to stock no change 

Link to comment
Share on other sites

  • 2 weeks later...
On 24/05/2021 at 1:23 PM, boon said:

0.5 bar is wastegate pressure if I remember right, so either it's plumbed wrong (possibly a restrictor pill missing), or there's a faulty solenoid, or it's in limp mode.

sweet thankyou ive read the TT guide and checked all the vacuum lines with the correct map for rev D i do have a hks BOV genuine so ive eliminated the bleed offf line back to the suction side of the turbo for the BOV line and returned the secondary turbo back to correct no restriert so i need to do that, but my primary (small) turbo or first turbo still only running like .6 bar max, What should it be running? i have one of those zero sports VOD controllers appears to do nothing, the vacuum box appears correct with restricter pill, i do have a PDS fault on the ecu pressure differential sensor aswell.

 

On another note ive got everything to flash the vehicle but i cant figure out the plugs my car just goes into diagnostic mode checking everything repeatidly should i be flashing in this state? i Cant find anything on REV D specificaly i plugged the green plug together and joined the 4 wires required on the white 6 way plug  also but vehicle just keeps running diagnostic?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...