Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Body Integrated Unit beeping continuously after alarm removal in Subaru Impreza


WAYSXY

Recommended Posts

Hey, im having a problem with my 2001 Subaru Impreza 15i,

This car before i owned it had an avs alarm installed which no longer worked. So i removed every wire from the alarm system in the car and rejoined the old existing wires. taped up old splice wires etc etc.

After removing the alarm. the car was beeping continuously from under the drivers side dash, i narrowed the beep down to the black box underneath the dash, google said it was my body integrated unit. has a white sticker on it with a code
now with the issues, the body integrated unit beeps. but the car still starts, runs and drives. but the beeping continues even with the car running.

also with the beeping problem. none of the door locks work, neither does the interior clock or interior lights (can't check radio as doesnt have one installed). also the radiator fans dont kick on, even with it at temperature and the ac on high. but relays work, gets power. and when connecting the green plugs the fans cycle speeds and off. could be related
Also all fuses under the dash have voltage going to them on both pins.
I can get the beeping to go by removing the door fuse under the dash.

I was wondering if there in a remedy for this problem? like connecting a few wires, at least to make the doors lock. or do i need to get a new biu with matching keys from a wreck?. will it need a matching ecu as well?
The key i use to start the car is factory but doesn't have the motherboard inside of the key to open/lock doors. where the battery goes.

Thank you for reading. hopefully someone can help.

Link to comment
Share on other sites

Hey,

11 hours ago, boon said:

To be honest it sounds like you've made a mess of the alarm removal.

 

First place I'd be looking is the door sensing. It sounds like the car thinks the driver's door is open.

Hey, checked the door sensing, those little black rubber things that tell if the door is open or closed?. all doors work, with the red light on the dash showing a door is open and turns off when all doors are closed/ particular door is closed. 
Also with the alarm, all the alarm wires were spliced into the factory wiring, with only one wire cut that i had to re-solder and wrap up.

Link to comment
Share on other sites

6 minutes ago, boon said:

Get an electrical wiring diagram for the car as a start.

 

Is it a continuous beep or a beep beep beep beep?

 

hey, thanks for the reply. in regards to the beeping, it is a beep beep beep. regardless if doors are open or not, and if engine is running or not. Whats the best site for wiring diagrams for a subaru you recommend. thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...