Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

2010 Subaru Forester Xt


Matthat

Recommended Posts

Hey I want to lower my SH forester what is the easiest way to do this?

 

Also what is the best turbo back exhaust to get installed? I currently have a catback exhaust installed that has a straight pipe, wondering if a turboback will be as loud and hopefully give the car more power.

 

Thanks in advance

  • Like 1
Link to comment
Share on other sites

Hey Matthat,

 

I don't have answers but I'm in the same position.

 

No. 1 on my list is to install stiffer sway bars. I'm thinking Whiteline 24mm front, 22mm rear.

 

No. 2 is lowering. In my case I don't want to slam it, only after a small amount of lowering, e.g. 1". I was thinking King springs but their website says "DUE TO A LACK OF SUSPENSION TRAVEL OF THE SHOCK ABSORBERS, WE CAN NOT MANUFACTURE A LOWERED NOR A RAISED HEIGHT FOR THIS VEHICLE"  so I need to research this some more. https://kingsprings.com.au/catalogue/vehicle/837/subaru-forester-sh-without-self-level-rear-3-2008-2013

 

No. 3 is exhaust. Mine is currently bog standard. I haven't done any research on this yet.

 

Link to comment
Share on other sites

I have a straight pipe from my cat back, very loud, good rumble on it. I talked to mag and turbo and yes they said the same thing about the suspension. I was wondering if it's possible to bolt on wrx suspension and do it that way.

Link to comment
Share on other sites

Pedders may do springs.

 

sway bars if you have the factory bar and mounts then look at the Sti from the 08-14 if the american forums can be trusted. A high vehicle and heavy bar would be pretty s***. 

the white line bars are very stiff even in the Sti they are overkill on the road. Even at 40kph on a tight 90 turn the car squats at the back enough to feel the balance shift. 
 

for shocks maybe the legacy would be closer in that it is higher than Impreza and could be same mounting.

 

Link to comment
Share on other sites

  • Admin
39 minutes ago, Gripless said:

Pedders may do springs.

 

sway bars if you have the factory bar and mounts then look at the Sti from the 08-14 if the american forums can be trusted. A high vehicle and heavy bar would be pretty s***. 

the white line bars are very stiff even in the Sti they are overkill on the road. Even at 40kph on a tight 90 turn the car squats at the back enough to feel the balance shift. 
 

for shocks maybe the legacy would be closer in that it is higher than Impreza and could be same mounting.

 

 

A GR impreza crosstrek/xv whichever one it was at that point would probably be the closest since the forester chassis is usually closer to an impreza than a legacy

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...