Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Help wanted !


Henasi

Recommended Posts

Hey guys first time poster here .

I have acquired a 2003 bp5 legacy , the guy I got it off has done a heap of work himself changes some of the interior to new stuff , recond block heads and head gaskets done etc have some of the proof but most done by himself.

 

The problems are cars in limp mode has thrown a few codes one being the knock sensor I'm sorting that but have been told that wont cause it to go into limp mode ? Main cause of concern is

b0223 -  can-hs vdc/abs no receive data

and u1223-  can-hs vdc/abs no receive data .

Few things online and talking to people seem to think could be the abs computer they are common to fault  with some wire in them , if anyone had the abs wiring diagram for a 2003 bp5 legacy that would be great 

 

Edited by Henasi
  • Like 1
Link to comment
Share on other sites

2 hours ago, Henasi said:

Hey guys first time poster here .

Hi

 

2 hours ago, Henasi said:

I have acquired a 2003 bp5 legacy , the guy I got it off has done a heap of work himself changes some of the interior to new stuff , recond block heads and head gaskets done etc have some of the proof but most done by himself.

 

I'm scared for you.

 

2 hours ago, Henasi said:

 

The problems are cars in limp mode has thrown a few codes one being the knock sensor I'm sorting that but have been told that wont cause it to go into limp mode ?

 

Is the knock sensor saying there is knock, or is the ecu saying that the knock sensor is broken? Big difference and I think if the engine is knocking, then it will go into limp mode for sure at some level of knock.

 

2 hours ago, Henasi said:

 

Main cause of concern is

b0223 -  can-hs vdc/abs no receive data

and u1223-  can-hs vdc/abs no receive data .

Few things online and talking to people seem to think could be the abs computer they are common to fault  with some wire in them , if anyone had the abs wiring diagram for a 2003 bp5 legacy that would be great 

 

 

If that's true I doubt a wiring diagram is going to help.

  • Like 3
Link to comment
Share on other sites

Does it even have abs, is there a abs pump connected up in the engine bay?

 

You may want to start by checking the part numbers on the ECU and abs etc to see if they are from the car originally.


the. Go checking for unconnected plugs and cut wires. 

Link to comment
Share on other sites

On 14/10/2021 at 12:16 AM, Gripless said:

Does it even have abs, is there a abs pump connected up in the engine bay?

 

You may want to start by checking the part numbers on the ECU and abs etc to see if they are from the car originally.


the. Go checking for unconnected plugs and cut wires. 

Yep has abs the "subaru specialist " local shop have confirmed its abs communication error but I already told them that as I have scanned it and got those codes. but they have been pretty useless so have got the car back 

Link to comment
Share on other sites

On 13/10/2021 at 9:31 PM, Loren said:

Hi

 

 

I'm scared for you.

 

 

Is the knock sensor saying there is knock, or is the ecu saying that the knock sensor is broken? Big difference and I think if the engine is knocking, then it will go into limp mode for sure at some level of knock.

 

 

If that's true I doubt a wiring diagram is going to help.

Knock sensor had been wired in bad there is no detonation happening have sorted  knock sensor now and the "subaru specialist " said it wouldnt cause it to go into limp more but the have done bugger all and have had the car a week so I've got it back and taking it to a auto spark tomorrow , cars pretty algood drives well altho in limp mode on the short drive I've done

Edited by Henasi
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...