Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

brembos on a GC/GF


Recommended Posts

So im having a sh\t of a time finding the right rear rotors to put on a GF.

The fronts are a direct bolt on from the v8, 5 * 100pcd, 326mm diam, 30mm thick. Easy.

The rears.. totally different story. (as i run the smaller R160 rear end ((read: handbrake hub)).

I know the have to be 5 * 100pcd..thats easy.

What i dont know is:

* handbrake drum size (i think its 170mm)

* rotor diam

* rotor thickness.

I have found some "brembo" rotors at 316mm and 20mm thick but i think they are wrong, as there are some at 326mm and 30 the same as the fronts..

Can some one please help.. that actually knows.. :'( *bash head on desk*

Link to comment
Share on other sites

from Tony

cheers mate

 

Brembo rear discs are 316mm x 20mm.

best bet would be to get the V7+ rotors and get an engineer to make a packer for the inner drum that steps it down to your 170mm handbrake. Ths could be pressed in to hold in place. Would save some hassle in finding the rotors you need, and most likely will work out cheaper too...

Link to comment
Share on other sites

Guest boostin

Lay both discs on the bench with the bit where the studs go through facing down. Make sure they both have around the same overall height. Note pic is an unknown disc, so don't reference it back to yours.

Where it says on the top pic 68.6 on the LH side, you need to check this measurement. I imagine they will be the same. If not, when you bolt the wheel up, the disc may lock up against the backing plate where the hand brake shoes mount.

39691d1151577317-brake-disc-dimensions-a

Link to comment
Share on other sites

arrr yes.. so the "depth" of the drum. Its been done lots and works.. its just the exact dimensions and corresponding rotor i was looking for.

The rears in two pots or brembo two pot are both 20mm thick so its sweet..

The brembo rotors being larger in diameter do mess with the stone gaurds i know that, so have to mod this out of the way.

Link to comment
Share on other sites

I dont rate DBA on the track what so ever and I've tried several sets they cracked in no time, found the cheaper no-name brands or 2nd hand ones performed just as well if not better lol. Currently have a 2nd hand set of brembo rotors have have lasted 4 trackdays whilst my last set of DBA's only lasted two which I was pissed about for the huge expense I paid for them.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...